• Out-of-Stock
Arduino MKR WiFi - board with SAMD21 microcontroller
search
  • Arduino MKR WiFi - board with SAMD21 microcontroller
  • Arduino MKR WiFi - board with SAMD21 microcontroller
  • Arduino MKR WiFi - board with SAMD21 microcontroller
ID: 575954

Board is a board with Atmel ATSAMW25 chip, the system has SAMD21 microcontroller (ARM, Cortex-M0+ core, 256 kB Flash, 8 KB SRAM) treated with 48 MHz clock. The ATSAMW25 chip also includes the WINC1500 Wi-Fi module. The user has at his disposal: 8 I/O lines, 12 PWM channels, 7 analog inputs. Arduino MKR1000 ABX00004

Retired
Kamami is the official distributor of Arduino development kits and accessories. All boards of this brand in our offer are original and come directly from the manufacturer.

Description

Arduino MKR1000 is a board with Atmel ATSAMW25 chip, the chip has SAMD21 microcontroller (ARM, Cortex-M0+ core, 256 kB Flash, 8 KB SRAM) treated with 48 MHz clock. The ATSAMW25 chip also contains the WINC1500 Wi-Fi module (2.4 GHz, 802.11 b/g/n), as well as the ECC508 CryptoAuthentication chip. The user has at his disposal: 8 I/O lines, 12 PWM channels, 7 analog inputs. The board has a built-in Li-Pol battery charger. The module will be used in IoT (Internet of Things) projects.

Programming is done using the Arduino IDE.

Warning!
The board operates with a logic voltage of 3.3 V. The input/output pins tolerate a voltage of up to 3.3 V, a higher voltage may damage the system. When using the periphery using a 5 V logic voltage, it is necessary to use a logic converter.

Features

  • Board with ATSAMW25 chip
  • SAMD21 microcontroller
    • ARM, Cortex-M0 + core
    • Flash memory: 256 KB
    • SRAM memory: 32 KB
    • Operating frequency: 48 MHz
  • WINC1500 WiFi module
    • Compliance with the 802.11 b/g/n standard
    • Interface: SPI
    • Support for WEP, WPA, WPA2
  • Logic level: 3.3 V
  • Digital I/O lines: 8
  • Analog inputs: 7 (12-bit analog-to-digital converter)
  • Analog outputs: 1 (10-bit D/A converter)
  • Interfaces: UART, SPI, I2C
  • External interrupt support
  • Built-in Li-Pol charger system
  • JST connector for connecting an external Li-Pol 1S battery
  • Power supply: 5V
  • Dimensions: 61.5 x 25mm
  • Weight: 32 g
575954

Data sheet

Microcontroller
ATSAMD21E18
Core
Cortex-M0+
Frequency
48MHz
Flash memory
256kB
RAM
32kB
EEPROM memory
none
Number of digital pins
21
Number of PWM channels
12
Ilość wejść analogowych
7
ADC
1x 12bit
DAC
1x 10bit
CAN
none
USB
1
Ethernet
none
WiFi/BT module
No
Bluetooth module
No
GSM/GPRS module
No
Logic voltage
3,3 V
MicroSD slot
No
Supply voltage min
5 V
Supply voltages max
5 V

Manufacturer

  • BTC Korporacja sp. z o. o.
  • Ludwinowo Zegrzyńskie 52G
  • 05-140 Ludwinowo Zegrzyńskie
  • Poland
  • [email protected]
  • 22 767 36 20

You might also like

Other products in the same category (16)