- Out-of-Stock
X-NUCLEO-NFC06A1 - expansion board with NFC reader
ID: 576035
5906623410538
Expansion board for STM32 Nucleo with NFC card reader based on the ST25R3916 chip. The board has an Arduino Uno R3 compatible connector and can be combined with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-NFC06A1
Description
X-NUCLEO-NFC06A1 is an expansion board for STM32 Nucleo with an NFC card reader based on the ST25R3916 chip. The reader supports the protocols ISO/IEC 14443 type A and B, ISO/IEC 15693 and ISO/IEC 18092. It provides the ability to detect, read and write NFC tags type 1, 2, 3, 4 and 5. In addition, the automatic antenna tuning system allows you to work close to metal parts and in changing environmental conditions.
The board has an Arduino Uno R3 compatible connector and can be combined with STM32 Nucleo boards. The extended Arduino connector allows cascading the board with other extensions.
Features
- On-board NFC card reader IC: ST25R3916
- 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
- Six general purpose LEDs
- ISO 18092 passive and active initiator, ISO 18092 passive and active target
- NFC-A and NFC-F card emulation
- ISO 14443A and ISO14443B
- ISO 15693
- FeliCa™
- Up to 1.7 W output power with differential antenna
- Possibility of driving two antennas in single ended configuration
- Inductive and capacitive wake-up
- Automatic antenna tuning system
- Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
- Equipped with Arduino UNO R3 connector
- Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3916
- Scalable solution for multiple board cascade
- FCC certified
576035
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł155.00
24h
Available quantity: 14
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F411RE MCU, 512KB flash memory, STM, RoHS
zł86.43
24h
Available quantity: 3
Available
Expansion board with a dynamic NFC/RFID tag based on the M24SR64-Y. The system is equipped with EEPROM memory, the module can be powered by the Arduino connector. STMicroelectronics X-NUCLEO-NFC01A1
zł52.15
24h
Available quantity: 8
Available
The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards
zł52.15
24h
Available quantity: 2
Available
The X-NUCLEO-NFC05A1 is an NFC card reader expansion board based on the ST25R3911B. The expansion board is configured to support ISO14443A/B, ISO15693, FeliCa™ and AP2P communication
Delivery date unknown
No product available!
Other products in the same category (16)
MYIR MYC-C7Z020 is a single board computer module based on the MYC-C7Z020 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
Retired
No product available!
UART GPS Module, NEO-7M-C onboard, straight/vertical pinheader
Retired
No product available!
The Arduino UNO WiFi board is based on the ATmega328 and it has an integrated ESP8266 WiFi Module. If you are starting out with Arduino, or starting with IoT, this is the board to get. A000133
Retired
No product available!
Printed circuit board with programmed layout for a dual-function acoustic switch. AVT3144 A +
Retired
No product available!
Programmed layout for a dual-function acoustic switch. AVT3144 UK
Retired
No product available!
A set for self-assembly of a dual-function sound switch. AVT3144 B
Retired
No product available!
Printed circuit board and programmed clock system with a 20mm display set by means of GPS. AVT5522 / 1 A +
Retired
No product available!
AVT kit for self-assembly of an accurate clock with a 20mm display set by means of GPS. AVT5522 / 1 B
Retired
No product available!
Assembled, accurate clock with 20mm display set by means of GPS. AVT5522 / 1 C
Retired
No product available!
Printed circuit board and programmed clock system with a 55mm display set by means of GPS. AVT5522 / 2 A +
Retired
No product available!
AVT set for self-assembly of the clock with a 55mm display set by means of GPS. AVT552 / 2 B
Retired
No product available!
Assembled clock with 55mm display set by means of GPS. AVT5522 / 2 C
Retired
No product available!
A set of PCB boards and a programmed layout for building a simple led clock. AVT3132 A +
Retired
No product available!
AVT kit for self-assembly of a simple LED clock with a blue display. AVT3132 B
Retired
No product available!
Assembled clock with a very simple construction with LED display in red. AVT3132 C
Retired
No product available!
PCB and programmed system for LED clock with alarm function. AVT1832 A +
Retired
No product available!
Expansion board for STM32 Nucleo with NFC card reader based on the ST25R3916 chip. The board has an Arduino Uno R3 compatible connector and can be combined with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-NFC06A1