Description
The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards.
The M24LR04E-R is an NFC Type V/RFID tag IC with a dual-interface 4 Kbit Electrically Erasable Programmable Read-Only Memory (EEPROM) that also features an I2C interface.
The EEPROM is organized as 512 x 8 bit in the I2C mode and as 128 x 32 bit in RF mode. It can be operated either from an external power supply or directly powered by the received carrier electromagnetic field.
The tag provides an user configurable digital output pin toggling during either RF Write in Progress or RF Busy mode.
The M24LR04E-R provides an Energy Harvesting mode. When activated, the M24LR04E-R delivers the excess energy coming from the RF field on the Vout analog pin. In case the RF field strength is insufficient or when Energy Harvesting mode is disabled, the analog output pin Vout goes into high-Z state and Energy Harvesting mode is automatically stopped.
The X-NUCLEO-NFC02A1 is compatible with the Arduino™ UNO R3 connector pin assignment and interfaces with the STM32 MCU via the I2C pins.
Features
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
STM32 Nucleo development board for STM32 F3 series - with STM32F302R8 MCU, 64KB flash memory, STM, RoHS
Demonstration kit for M24LRxx Dual Interface EEPROMs, STM, RoHS
STM32 Nucleo development board for STM32 F4 series - with STM32F411RE MCU, 512KB flash memory, STM, RoHS
No product available!
Development kit for ST Dual Interface EEPROM (M24LRxx-R), STM, RoHS
STM32 Nucleo-64 development board with STM32F303RET6 MCU, supports Arduino and ST morpho connectivity
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
KA-NUCLEO-F411CE v2 is a development board based on the STM32F411CE microcontroller. It has a built-in programmer compatible with ST-Link / v2-1, it is possible to program and debug the microcontroller via the USB connector.
An expansion board with several EEPROM memories from the M24xx and M95xx series, designed to work with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-EEPRMA2
Expansion board for STM32 Nucleo designed for applications using MEMS analog microphones. The board is compatible with STM32 Nucleo and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-AMICAM1
No product available!
Expansion board with Bluetooth v5.0 compatible module. The set is based on the BlueNRG-M2SP certified module with the BlueNRG-2 SOC system. The producer provides together with the module a library of Bluetooth LE protocol stacks. STMicroelectronics X-NUCLEO-BNRG2A1
No product available!
Time-of-Flight VL53L3CX Distance Sensor Expansion Board. The set is designed to measure distances and detect gestures. Distance measurement was carried out using VL53L3CX laser sensors. STMicroelectronics X-NUCLEO-53L3A2
Expansion board with BlueNRG-M0 module compatible with Bluetooth v4.2. It is compatible with the ST morpho connector system (unmounted) and Arduino UNO R3. Communication with the module is via the SPI interface. STMicroelectronics X-NUCLEO-IDB05A2
No product available!
Extension board with distance sensor ToF VL53L1, The sensor has a range of up to 400 cm. The kit includes 2 modules with sensors that can be connected via a 10-pin connector. The shield is compatible with STM32 Nucleo boards and has an Arduino UNO R3 connector. STMicroelectronics X-NUCLEO-53L1A2
An expansion board with digital outputs (for industrial applications) designed to work with the STM32 Nucleo kits. The module is based on a single high-side switch IPS160HF. STMicroelectronics X-NUCLEO-OUT08A1
An expansion board with digital outputs (for industrial applications) designed to work with the STM32 Nucleo kits. The module is based on the IPS161HF double high-side switch. STMicroelectronics X-NUCLEO-OUT10A1
Extension module for STM32 Nucleo based on a two-channel SIO transceiver and IO-Link PHY L6364Q with built-in voltage stabilizers and a DC-DC converter. STMicroelectronics X-NUCLEO-IOD02A1
No product available!
The set consists of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-53L3A2 board with the VL53L3CX distance sensors operating in ToF technology. STMicroelectronics P-NUCLEO-53L3A2
The set consists of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-6180A1 board with the VL6180 distance sensors operating in ToF technology. STMicroelectronics P-NUCLEO-6180A1
An expansion board that enables the implementation of TCPP01-M12 functions and USB Type C surge protection for VBUS and CC lines suitable for sink applications. STMicroelectronics X-NUCLEO-SNK1M1
No product available!
The set consists of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-53L1A2 board with the VL53L1 distance sensors operating in ToF technology. STMicroelectronics P-NUCLEO-53L1A2
Set consisting of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-53L4A2 board with the VL53L3CX ToF distance sensor. STMicroelectronics P-NUCLEO-53L4A2
The set consists of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-53L5A1 board with the VL53L5CX ToF distance sensor. STMicroelectronics P-NUCLEO-53L5A1
The set consists of the NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-6283A1 module with the 6-channel ALS VD6283 color sensor. STMicroelectronics P-NUCLEO-6283A1
The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards