P-NUCLEO-6283A1 - kit with plate X-NUCLEO-6283A1 + STM32F401RE
ID: 1181201
5906623436606
zł314.19
Tax included
zł255.44 tax excl.
The set consists of the NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-6283A1 module with the 6-channel ALS VD6283 color sensor. STMicroelectronics P-NUCLEO-6283A1
Description
A set dedicated to testing and prototyping solutions based on the VD6283 color sensor. It consists of the X-NUCLEO-6283A1 expansion board and the NUCLEO-F401RE development board.
The X-NUCLEO-6283A1 is an expansion board with a 6 channel Ambient Light Sensor (ALS). Provides fast light measurement thanks to individual ADC and reading circuits for each color channel (red, green, blue, IR, transparent and visible). The VD6283 uses hybrid color filters with precise responses, allowing the accurate calculation of Correlated Color Temperature (CCT) and lux information. The VD6283 can be used to manage display brightness or correct scene lighting. Additionally, the VD6283 can extract light flicker frequencies from 100Hz to 2kHz, including square LED signals.
NUCLEO-F401RE allows you to implement projects based on an efficient microcontroller with a 32-bit ARM Cortex core. The modules are compatible with the Arduino shields and the mbed.org on-line compiler system. Nucleo works with most popular development platforms, including Keil, IAR and environments based on the GCC compiler.
Features
NUCLEO-F401RE
- STM32F401RE microcontroller
- STM32 F4 series
- Flash memory: 512 KB
- Possibility of expansion through:
- connector compatible with Arduino Uno Revision 3
- STM32 MORPHO connector, giving access to all I / O lines
- Built-in ST-LINK / V2-1 programmer / debugger
- Board power supply: from USB or via MORPHO connector (3.3 V, 5 V, 7 - 12 V)
- Three LED indicators
- Two momentary buttons: user button and RESET
X-NUCLEO-6283A1
- 6-channel Ambient Light Sensor (ALS) VD6283 with advanced light flicker extraction
- Compatible with STM32 Nucleo boards
- The connector is compatible with Arduino UNO R3
- Sensor software available on the manufacturer's website
Kit contains
- NUCLEO-F401RE
- X-NUCLEO-6283A1
1181201
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Extension board for SMT332 Nucleo with VL6180X sensor, allowing to measure ambient lighting, zoom and recognition of gestures. On the PCB, outside the sensor, there is also a four-digit LED display and connectors for additional sensors
zł118.29
24h
Available quantity: 3
Available
The X-NUCLEO-IHM03A1 plate allows the control of a high-power stepper motor; the maximum current of the phase is 10A rms, additionally the controller enables execution up to 1/128 step and has a number of protections. X-NUCLEO-IHM03A1
zł51.99
24h
Available quantity: 3
Available
The STM32 Nucleo expansion board allows you to control a bipolar stepper motor. The maximum phase current is 2.8A RMS, the controller has overheat protection and overcurrent protection
zł69.53
24h
Available quantity: 2
Available
DC-DC LED driver expansion board based on LED6001 for STM32 Nucleo
zł114.77
24h
Available quantity: 2
Available
Other products in the same category (16)
Extension board for SMT332 Nucleo with VL6180X sensor, allowing to measure ambient lighting, zoom and recognition of gestures. On the PCB, outside the sensor, there is also a four-digit LED display and connectors for additional sensors
zł118.29
24h
Available quantity: 3
Available
The X-NUCLEO-53L1A1 is an expansion board for the NUCLEO-F401RE and NUCLEO-L476RG development boards. It provides a complete evaluation kit allowing anyone to learn, evaluate, and develop their applications using the VL53L1X ToF, long-distance ranging sensor technology.
zł262.51
24h
Available quantity: 1
Available
Board with digital outputs designed to work with STM32 Nucleo. It is based on the IPS1025H single high-side switch circuit. STMicroelectronics X-NUCLEO-OUT05A1
zł272.33
24h
Available quantity: 1
Available
The STEVAL-FKI868V2 evaluation board is based on the S2-LP sub-1GHz ultra-low power low data-rate transceiver suitable for ISM bands and wireless M-Bus. The NUCLEO-L053R8 motherboard is equipped with an STM32L0 low power microcontroller to control the S2-LP
zł361.71
24h
Available quantity: 1
Available
Extension module for STM32 Nucleo based on a two-channel SIO transceiver and IO-Link PHY L6364Q with built-in voltage stabilizers and a DC-DC converter. STMicroelectronics X-NUCLEO-IOD02A1
zł128.28
24h
Available quantity: 1
Available
The STM32 Nucleo expansion board allows you to control a bipolar stepper motor. The maximum phase current is 2.8A RMS, the controller has overheat protection and overcurrent protection
zł69.53
24h
Available quantity: 2
Available
Expansion board for STM32 Nucleo designed for applications using MEMS analog microphones. The board is compatible with STM32 Nucleo and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-AMICAM1
zł200.31
1 weeks
No product available!
An expansion board with digital outputs (for industrial applications) designed to work with the STM32 Nucleo kits. The module is based on a single high-side switch IPS160HF. STMicroelectronics X-NUCLEO-OUT08A1
zł209.46
24h
Available quantity: 1
Available
X-NUCLEO-IDB05A1 - shield (expander) for Arduino / NUCLEO with SPBTLE-RF module (BLE, Bluetooth 4.1)
Expander (shield) compatible with Arduino and NUCLEO (STM32) systems, equipped with a Bluetooth 4.1 (BLE) radio module from the SPBTLE-RF family
zł73.05
24h
Available quantity: 1
Available
An expansion board with several EEPROM memories from the M24xx and M95xx series, designed to work with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-EEPRMA2
zł94.67
24h
Available quantity: 1
Available
Expansion board with LCD TFT 2.2" display for STM32 Nucleo-144 sets. Equipped with SPI NOR Flash 64Mbit memory for storing images and a joystick for GUI navigation. STMicroelectronics X-NUCLEO-GFX02Z1
zł182.69
24h
Available quantity: 3
Available
STSAFE-A110 based security module, compatible with STM32 Nucleo boards and Arduino UNO R3 connector boards. It provides simple integration of security functions such as data protection and authentication, and its cooperation with X-CUBE-SAFEA1 and X-CUBE-SBSFU software packages enables rapid implementation of STM32 microcontroller-based applications. STMicroelectronics X-NUCLEO SAFEA1B
zł79.22
24h
Available quantity: 2
Available
Board with digital outputs designed to work with STM32 Nucleo. It is based on the IPS1025H-32 single high-side switch circuit. STMicroelectronics X-NUCLEO-OUT06A1
zł272.33
24h
Available quantity: 1
Available
The X-NUCLEO-67W61M1 board integrates the ST67W611M1 Wi-Fi 6/Bluetooth module, providing a flexible environment for designing wireless applications in STM32 systems. It enables fast integration via SPI and support for popular ARDUINO and Raspberry Pi connector formats.
zł186.09
1 weeks
No product available!
Expansion module with color sensor VD6283. The cap is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-6283A1
zł202.48
24h
Available quantity: 2
Available
Two axis stepper motor driver expansion board based on the L6470 for STM32 Nucleo
zł78.49
24h
Available quantity: 4
Available
The set consists of the NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-6283A1 module with the 6-channel ALS VD6283 color sensor. STMicroelectronics P-NUCLEO-6283A1