X-NUCLEO-PLC01A1
ID: 560180
5906623409952
zł49.64
Tax included
zł40.36 tax excl.
Industrial input/output expansion board based on VNI8200XP and CLT01-38SQ7 for STM32 Nucleo
Description
The X-NUCLEO-PLC01A1 is an industrial input/output evaluation board which expands the STM32 Nucleo board functionality with a PLC (programmable logic controller) function subset. It is compatible with the Arduino UNO R3 connector layout and is designed around VNI8200XP (solid state relay) and CLT01-38SQ7 (octal digital termination array). The X-NUCLEO-PLC01A1 interfaces with the STM32 MCU via the SPI peripheral. Moreover, it is equipped with a set of diagnostic and activity LEDs to facilitate application debugging. It can accept other STM32 plug-on expansion boards to further extend the STM32 Nucleo board functionality.
The X-NUCLEO-PLC01A1 allows the rapid evaluation of the ICs on board performing a basic set of PLC operations in conjunction with the X-CUBE-PLC1 software package. X-NUCLEO-PLC01A1 is not intended to evaluate the single devices at their full specifications. VNI8200XP includes advanced protection and fault detection features. CLT01-38SQ7 provides protection and isolation in industrial operating conditions as well as an 'energy-less' status indication for each of the eight input channels, featuring minimal power consumption; it is designed for situations that are required to pass the IEC61000-4-2 8kV and 15kV test standards. Both the CLT01-38SQ7 and the VNI8200XP are designed to meet the most common industrial requirements (i.e. IEC61000-4-2, IEC61000-4-4, IEC61000-4-5 or IEC61131-2). To eveluate them further, refer to the single-product evaluation boards.
Features
- Enables a PLC (Programmable Logic Controller) function subset on STM32 Nucleo
- 8x input with CLT01-38SQ7 high-speed protected digital termination array
- 8x output with VNI8200XP high-side solid state relay
- Status LEDs: Fault, Thermal, Power
- IO (input/output) activity LEDs 24V power supply
- Free comprehensive development firmware library and example compatible with STM32Cube firmware
- Compatible with STM32 Nucleo boards
- Compatible with Arduino UNO R3 connector
X-NUCLEO-PLC01A1
560180
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł49.90
24h
Available quantity: 15
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F411RE MCU, 512KB flash memory, STM, RoHS
zł62.48
24h
Available quantity: 17
Available
Other products in the same category (16)
Nucleo-32 series board equipped with STM8S207K8T6C microcontroller with built-in programmer-debugger ST-Link v.2.1, connectors compatible with Arduino Nano.
zł54.75
24h
Available quantity: 1
Available
Evaluation kit from the STM32 Nucleo-144 series equipped with the STM32L552ZE microcontroller in the LQFP144 enclosure. A large number of pins allows you to create complex devices using the numerous peripherals available in the microcontroller. STMicroelectronics NUCLEO-L552ZE-Q
zł113.31
24h
Available quantity: 2
Available
Expansion board with LCD TFT 2.2" display for STM32 Nucleo-144 sets. Equipped with SPI NOR Flash 64Mbit memory for storing images and a joystick for GUI navigation. STMicroelectronics X-NUCLEO-GFX02Z1
zł182.69
24h
Available quantity: 3
Available
Development board with ST Zio and ST morpho connectors, based on the STM32H755ZI microcontroller. Thanks to the embedded STLINK-V3 programmer, it is possible to program and debug the microcontroller via USB. STMicroelectronics NUCLEO-H755ZI-Q
zł148.56
24h
Available quantity: 8
Available
NUCLEO-WB05KZ – STM32 Nucleo-64 development board with STM32WB05KZ microcontroller, Bluetooth Low...
NUCLEO-WB05KZ is a compact and low-power STM32 board for Bluetooth Low Energy applications, equipped with the STM32WB05KZ microcontroller. Ideal for BLE projects and IoT solutions with rapid prototyping and expansion via ARDUINO and ST morpho connectors.
zł92.18
24h
Available quantity: 2
Available
X-NUCLEO-IDB05A1 - shield (expander) for Arduino / NUCLEO with SPBTLE-RF module (BLE, Bluetooth 4.1)
Expander (shield) compatible with Arduino and NUCLEO (STM32) systems, equipped with a Bluetooth 4.1 (BLE) radio module from the SPBTLE-RF family
zł73.05
24h
Available quantity: 1
Available
Available
STM32 Nucleo development board for STM32 L0 series - with STM32L053R8 MCU, 64KB flash memory, STM, RoHS
zł73.92
24h
Available quantity: 2
Available
Shield for STM32 Nucleo that allows you to add the possibility of operating a three-phase brushless motor (BLDC) or synchronous permanent magnet (PMSM). It uses the L6230 chip for control. X-NUCLEO-IHM07M1
zł54.13
24h
Available quantity: 3
Available
X-NUCLEO-IDS01A4 is a development board STM32 Nucleo that allows the use of the RF SPSGRF-868 module for the ISM band (868 MHz carrier).
zł80.63
24h
Available quantity: 1
Available
The X-NUCLEO-GNSS1A1 expansion board is based on the Teseo-LIV3F tiny GNSS module
zł213.00
24h
Available quantity: 2
Available
X-NUCLEO-PGEEZ1 is a versatile EEPROM memory expansion module that allows for easy integration with STM32 Nucleo boards. With its SPI interface, this module offers developers the ability to test and evaluate EEPROM memory with a capacity of up to 32 Mbit. It is an ideal solution for storing critical data in industrial applications, such as calibration, user settings, and monitoring. X-NUCLEO-PGEEZ1
zł226.53
24h
Available quantity: 1
Available
X-NUCLEO-IHM09M2 - expansion board with a connector for controlling a three-phase motor for STM32...
Extension board with motor control connector for STM32 Nucleo. Provides an easy way to implement control for three-phase motors. STMicroelectronics X-NUCLEO-IHM09M2
zł112.73
24h
Available quantity: 3
Available
The X-NUCLEO-IHM15A1 dual brush DC motor driver expansion board is based on the STSPIN840 for STM32 Nucleo. It provides an affordable and easy-to-use solution for the implementation of compact motor driving applications such as thermal printers, robotics and toys
zł89.38
24h
Available quantity: 1
Available
Bluetooth 5.2 and IEEE 802.15.4 communication kit. It uses the STM32WB55RG microcontroller (1 MB Flash, 256 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0 +). STMicroelectronics NUCLEO-WB55RG
zł177.44
24h
Available quantity: 4
Available
Starter kit from the NUCLEO series equipped with STM32G031K8 (64 kB Flash, Cortex-M0+) microcontroller, with embedded ST-Link v.2.1 debugger, connectors compatible with Arduino Nano. STMicroelectronics NUCLEO-G031K8
zł53.16
24h
Available quantity: 4
Available
Industrial input/output expansion board based on VNI8200XP and CLT01-38SQ7 for STM32 Nucleo