

The X-NUCLEO-LED61A1 is an expansion board designed to provide a sample application for the compact LED driver based on LED6001. The expansion board is equipped with a single-channel, constant-current LED driver for boost or SEPIC topologies.The X-NUCLEO interfaces with the STM32 microcontroller. It is compatible with the Arduino™ UNO R3 connector.
The brightness of the LED string connected to its output can be controlled through a PWM signal (0 % - 100 % dimming) or a control voltage (analog dimming). Open/Short LED fault, feedback disconnection, LED overcurrent and output-to-ground short-circuit (SEPIC only) faults are detected and managed through the LED driver.
The expansion board is designed to provide examples for applications involving several LEDs arranged is a single string (e.g., indoor and architectural LED lighting, off-grid street lighting, emergency LED lighting, white goods, gaming, etc.).
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
STM32 Nucleo expansion board designed to provide an application for the 16 channel LED driver LED1642GW. Depending upon the end application, RGB or single color LEDs can be connected to the board. Separate brightness control is possible for each channel. It is compatible with the STM32 Nucleo board family and equipped the Arduino™ UNO R3 connector layout. X-NUCLEO-LED16A1
No product available!
Expansion module designed for STM32 Nucleo-64 boards with built-in Power Delivery peripheral (UCPD). Allows prototyping of devices using the TCPP02-M18 and USB type C system. STMicroelectronics X-NUCLEO-SRC1M1
No product available!
The X-NUCLEO-IHM16M1 motor driver expansion board is based on the STSPIN830 monolithic driver for three-phase brushless motors. It represents an affordable, easy-to-use solution for driving brushless motors in your STM32 Nucleo project, implementing single and three-shunt current sensing
Expansion board with BlueNRG-M0 module compatible with Bluetooth v4.2. It is compatible with the ST morpho connector system (unmounted) and Arduino UNO R3. Communication with the module is via the SPI interface. STMicroelectronics X-NUCLEO-IDB05A2
Expansion board with a dynamic NFC/RFID tag based on the M24SR64-Y. The system is equipped with EEPROM memory, the module can be powered by the Arduino connector. STMicroelectronics X-NUCLEO-NFC01A1
Expansion board with a distance sensor ToF VL53L5CX with a matrix of 64 pixels and a range of up to 4 m. The shield is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L5A1
Board with digital outputs designed to work with STM32 Nucleo. It is based on the IPS1025H single high-side switch circuit. STMicroelectronics X-NUCLEO-OUT05A1
The set consists of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-53L3A2 board with the VL53L3CX distance sensors operating in ToF technology. STMicroelectronics P-NUCLEO-53L3A2
Expansion board with LCD TFT 2.2 "display for STM32 Nucleo sets. Equipped with SPI NOR Flash 64Mbit memory for storing images and a joystick for GUI navigation. STMicroelectronics X-NUCLEO-GFX01M2
The set consists of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-53L5A1 board with the VL53L5CX ToF distance sensor. STMicroelectronics P-NUCLEO-53L5A1
Extension board X-NUCLEO-IHM04A1 for STM32 Nucleo, with dual brush motor controller, operating based on the L6206 system
An expansion board designed for the STM32 Nucleo based on the Teseo-VIC3DA, a global navigation satellite system (GNSS) chip. STMicroelectronics X-NUCLEO-GNSS2A1
Two axis stepper motor driver expansion board based on the L6470 for STM32 Nucleo
The set consists of the NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-6283A1 module with the 6-channel ALS VD6283 color sensor. STMicroelectronics P-NUCLEO-6283A1
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
Time-of-Flight VL53L3CX Distance Sensor Expansion Board. The set is designed to measure distances and detect gestures. Distance measurement was carried out using VL53L3CX laser sensors. STMicroelectronics X-NUCLEO-53L3A2
Expansion module designed for STM32 Nucleo-64 boards with built-in Power Delivery peripheral (UCPD). It allows prototyping of devices using the TCPP03-M20 system and USB type C in the DRP (Dual Role Power) and DRD (Dual Role Data) functions. STMicroelectronics X-NUCLEO-DRP1M1
DC-DC LED driver expansion board based on LED6001 for STM32 Nucleo