- Out-of-Stock
Arduino Nano 33 BLE Sense (with headers) - board with nRF52840 microcontroller, BLE module and sensors
ID: 576014
7630049201576
Board with nRF52840 microcontroller with CortexM4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 module and sensors - 9-axis IMU module, temperature, pressure, humidity, light, color, gestures and microphone. Module with headers. Arduino ABX00035
Description
Arduino Nano 33 BLE Sense is a module with an nRF52840 microcontroller core CortexM4F equipped with 1 MB flash memory, 256 kB RAM and allows clock speeds up to 64 MHz. The board has a built-in Bluetooth 5.0 module (U-Blox NINA B306) and sensors - a 9-axis IMU module, temperature, pressure, humidity, light, color, gestures and a microphone. The module has two 15-pin connectors equipped with GPIO, SPI, I2C, PWM, USART, DAC and ADC. Module with headers.
Warning!
Arduino Nano 33 BLE only supports 3.3 V inputs/outputs and is not compatible with 5 V (connecting 5 V signals directly can damage the board).
Arduino Nano 33 BLE only supports 3.3 V inputs/outputs and is not compatible with 5 V (connecting 5 V signals directly can damage the board).
Power supply from the 5 V board is possible after connecting the jumper at the bottom of the board and connecting the USB cable. The Arduino Nano 33 BLE also has a 6-pin debug connector (available as test pads). Unlike other Arduino boards, Arduino Nano 33 BLE has an internal pull-up of the I2C line (pins A4 and A5) to the supply line.
Arduino Nano 33 BLE can be programming by Arduino IDE.
Features
- NRF52840 microcontroller (64 MHz, 1 MB Flash, 256 kB RAM)
- BLE 5.0 U-Blox NINA B306 module
- LSM9DS1 IMU
- LPS22HB pressure sensor
- HTS221 temperature and humidity sensor
- Gesture sensor ADPS-9960
- MP34DT05 digital microphone
- Micro USB connector
- Voltage level 3.3 V
- Number of I/O lines: 14 (6 can work as PWM outputs)
- GPIO, SPI, I2C, USART, PWM, ADC, DAC interfaces
- 8 analog inputs
- Dimensions: 45 x 18 mm
576014
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Module with the ATMega4809 microcontroller from the AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has two 15-pin connectors equipped with GPIO, SPI, I2C, PWM, USART, DAC and ADC. Module with headers. Arduino ABX00033
zł69.02
Delivery date unknown
No product available!
Board with nRF52840 microcontroller with Cortex M4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 and IMU LSM9DS1 module. Module with headers. Arduino ABX00034
zł179.00
24h
Available quantity: 19
Available
Board with SAMD21 microcontroller with CortexM0 + core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Module with headers. Arduino ABX00032
zł139.00
24h
Available quantity: 2
Available
Other products in the same category (16)
No product available!
8x2 Character LCD - Black Bezel (Parallel Interface)
Retired
No product available!
20x4 Character LCD with LED Backlight (Parallel Interface), White on Blue
Retired
No product available!
No product available!
Pololu RP5 Expansion Plate RRC07A (Narrow) Solid Black
Retired
No product available!
Dagu Rover 5 Tracked Chassis with Encoders
Retired
No product available!
Motor with plastic gear 228:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 45 RPM and a maximum torque of 7.2 kg*cm. Pololu 1118
Retired
No product available!
120:1 Plastic Gearmotor Offset OutputPlastic gear motor 120:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and maximum torque of 5.4 kg*cm. Pololu 1119
Retired
No product available!
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 51 RPM and a maximum torque of 7.2 kg*cm. Pololu 1120
Retired
No product available!
Solarbotics GMPW-Y YELLOW Wheel with Encoder Stripes, Silicone Tire
Retired
No product available!
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121
Retired
No product available!
The adapter is designed for mounting LEGO wheels on an axis with a diameter of 2 mm used, among others. in Pololu mini motors with a plastic gear. Pololu 1001
Retired
No product available!
A small motor with a plastic gear 120:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1125
Retired
No product available!
A small motor with a plastic gear 180:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1593
Retired
No product available!
A small motor with a plastic gear 180:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1594
Retired
No product available!
No product available!
Board with nRF52840 microcontroller with CortexM4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 module and sensors - 9-axis IMU module, temperature, pressure, humidity, light, color, gestures and microphone. Module with headers. Arduino ABX00035