- Out-of-Stock
6-Way Adjustable DC Regulated Power Supply - universal power module
ID: 588839
Universal power supply module working on the basis of four 18650 batteries. It offers DC outputs with voltages of 9 V, 12 V, 24 V and adjustable in the range from 1 to 20 V, as well as two USB 5 V outputs. DFRobot FIT0674
Description
Universal power supply module working on the basis of four 18650 batteries. It has a built-in charging circuit, to which input power is supplied via a USB type C connector. The module is equipped with 6 independent outputs, including 4 on DC connectors and two as USB type A connectors. DC offer voltages of 9 V, 12 V, 24 V and an adjustable output in the range from 1 to 20 V (voltage level set with a potentiometer and shown on the LED segment display). Each of the outputs is handled by a separate chip, so the user can use all outputs simultaneously with their maximum efficiency. The module is equipped with short-circuit protection, and each output is controlled by switches. The charging status and the battery charge level are indicated by LED indicators. The module is perfect for all kinds of projects requiring portable power.
Attention!
- The kit does not include the 18650 batteries. They must be purchased separately. Batteries with a length of up to 67 mm are suitable for the module.
Features
- 3.7V 18650 Li-ion battery, four connected in series (supports 65mm and 67mm long 18650 batteries)
- Charging port: USB Type-C
- Charging current: 2A
- Charging time: about 4 hours (when using 2300mAh battery)
- Voltage accuracy: 3%
- Electricity display: 4 LEDs
- USB port 1:
- USB-A interface
- Rated voltage: 5.2V
- Rated current: 3 A.
- Peak current: 5 A.
- USB 2 port:
- USB-A interface
- Rated voltage: 5.2V
- Rated current: 3 A.
- Peak current: 5 A.
- 9V port:
- DC2.1 interface
- Rated voltage: 9.2V
- Rated current: 2.5 A
- Peak current: 3 A.
- Switch
- 12V port:
- DC2.1 interface
- Rated voltage: 12V
- Rated current: 2 A.
- Peak current: 2.5 A
- Switch
- 24V port:
- DC2.1 interface
- Rated voltage: 24V
- Rated current: 600 mA
- Peak current: 1 A.
- Switch
- Adjustable output:
- DC2.1 interface
- Rated voltage: 1V to 20V
- Voltage regulation resolution: 0.1V
- Rated current: 1A (20V) to 2.5A (1V)
- Peak current: 1.5A (20V) to 3A (1V)
- Adjustment potentiometer
- Switch
Kit contains
- 6-Way Adjustable DC Regulated Power Supply
- Connecting cable DC2.1 to DC2.1 50cm
- DC2.1 cable to 50 cm crocodile clip
- DC2.1 cable 50 cm
- DC2.1 cable for powering LattePanda 50 cm
- Instruction
588839
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
zł36.64
24h
Available quantity: 45
Available
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3000 mAh. Samsung INR18650-30Q
zł33.60
24h
Available quantity: 48
Available
Other products in the same category (16)
The OpenMV M7 Camera is a small, low-power microcontroller board that allows you to easily implement applications using machine vision in the real world. The best part about the OpenMV is that it is not only capable of image capture, but also face detection, color tracking, QR code reading and plenty more. SparkFun SEN-14186
Retired
No product available!
Camera module 0.3 Mpx with the Aptina Imaging MT9V111 CMOS sensor with a matrix resolution of 640 x 480 pixels and transmission speeds in the VGA format up to 30 FPS. Adapted to work in low light conditions. Communication via a parallel interface. ArduCAM B0059
Retired
No product available!
No product available!
No product available!
Mobile battery with a capacity of 8000 mAh, with flashlight function, for charging portable electronic devices, powered by 5V. The Power Bank is charged via the micro USB connector
Retired
No product available!
No product available!
Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56
Retired
No product available!
No product available!
NORS12 is a workshop organizer made of high quality plastic, with a transparent cover, closed with latches, with a solid handle for convenient transport. It has the ability to regulate the size and number of compartments
Retired
No product available!
Small open-source development board with an on-board HD video camera capable of capturing 720p videos at 30fps
Retired
No product available!
No product available!
No product available!
Let\'s talk cars. Because cars are cool, and the coolest of the cool might be the sports coupe: a sleek and stylish two-door car designed for high performance and driving enjoyment. Often built with a low, wide profile, sports coupes typically feature a powerful engine, sport-tuned suspension, aerodynamic design, and other performance-enhancing features that prioritize speed, agility, and handling. You don\'t buy a coupe for its fuel economy or trunk space, you buy it because a) you love to drive, b) you want to make a statement, and c) the cool factor. And nothing is cooler on a car, or makes a bigger statement than gull-wing doors! UGears 70205
Retired
No product available!
No product available!
The miniature digital potentiometer allows you to replace the analog potentiometer and control the resistance value using two buttons. The module contains inputs of the UP / DOWN buttons (for increasing and decreasing the resistance) and outputs in accordance with the analog potentiometer A, W, B (description on the circuit board). MOD-19.Z
Retired
No product available!
No product available!
Universal power supply module working on the basis of four 18650 batteries. It offers DC outputs with voltages of 9 V, 12 V, 24 V and adjustable in the range from 1 to 20 V, as well as two USB 5 V outputs. DFRobot FIT0674