- Out-of-Stock
Module with a 7-color e-Paper display with a diagonal of 4" and a resolution of 640x400 px. It supports ACeP (Advanced Color ePaper) technology, and the built-in controller communicates via the SPI interface. E-Paper displays are characterized by high contrast of the displayed image and consume power only if the displayed content is changed The module has a built-in 4 buttons on the side of the display and a connector with an I2C interface for connecting additional elements It is equipped with a 40-pin connector that allows you to connect the display to a Raspberry Pi. support available in the project's GitHub repository.
Data sheet
Manufacturer
Responsible person
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Miniature version of the Raspberry Pi computer equipped with SiP BCM2710A1 - 4x ARM Cortex-A53 1GHz twin with Raspberry Pi 3 and 512 MB of RAM and wireless connectivity WiFi 802.11 b / g / n + Bluetooth 4.2 / BLE
No product available!
Starter kit including a Raspberry Pi Zero 2 WH, official case, official power supply
Side panel with I/O elements for Totem Mini Lab and Totem Micro Lab sets. There are buttons, potentiometers, LED diodes and a relay on the board. Totem TE-SP01-B
No product available!
Side panel with sensors for Totem Mini Lab and Totem Micro Lab sets. The board has a microphone, OLED display, DH11 humidity sensor, NTC thermistor, buzzer and a DC motor control module. Totem TE-SP02-B
No product available!
Side panel with audio elements for Totem Mini Lab and Totem Micro Lab sets. The board has an audio amplifier with a loudspeaker, a VU indicator, a function generator and a pi filter circuit. Totem TE-SP03-B
No product available!
A stand for mounting the side panel for the Totem Mini Lab set. Increases the stability of the structure. Totem M-MLE1
No product available!
A set for building a fighting robot controlled by a mobile application for a smartphone or tablet. Totem TRK-MT1G
No product available!
A set for the construction of two fighting robots (green and yellow) controlled by a mobile application for a smartphone or tablet. Totem TRK-MT2
No product available!
A kit for building a four-wheeled platform controlled by a mobile application. TMK-4WDU totem
No product available!
A set for building a mobile robot with a gripper controlled by a mobile application. TMK-DMNNG totem
No product available!
Kit for building a dog robot controlled by a wire with a switch. Totem TKR-DG
No product available!
Kit for building a giraffe robot controlled by a wire with a switch. Totem TKR-GRF
No product available!
Kit for building a dinosaur robot controlled by a wire with a switch. Totem TKR-TRX
No product available!
A set for building a walking robot controlled by a mobile application. Totem TKR-LSP
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 15 V or 20 V and testing chargers. PDC005
No product available!
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
No product available!
Module with a 7-color ACeP e-Paper display with a diagonal of 4" and a resolution of 640x400 px. SPI interface. Pimoroni PIM600