Category: RETIRED PRODUCTS

Crimping tool HT106L by Prosonic, supports connectors: F59, F11, F6, UHF58, HF8

Crimping tool LY2070B for PROSONIC 4p4c, 6p6c connectors

Banana Pi R2 is a mini-computer (router) equipped with a Quad-core ARM Cortex-A7 quad-core MediaTek MT7623N processor, 2 GB of RAM, WiFi module, Bluetooth 4.1 and connectors: HDMI, 5 x Ethernet, 2x USB 3.0. The set has a 40-pin GPIO connector, on which you can find UART, SPI, I2C and ID EEPROM interfaces.

Printed circuit board for practical power splitter with quick clamps. AVT3175 A

AVT kit for self-assembly CAN-BOX - OBDII socket adapter. AVT5577 B

Desktop computer kit with expansion board that can turn a Raspberry Pi into a real desktop PC.

Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-01

Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-05

USB TO UART solution with USB Type A connector, Waveshare

Oyvind Nydal Dahl

The second version of the clock synchronization signal receiver, transmitted with AM modulation (DCF77). The built-in MAS6180 system allows you to receive timing frames from a time pattern using a carrier frequency of 77.5 kHz. Thanks to this module, it is possible to create a clock with automatic date and time synchronization. The module has a ferrite antenna. modDCF77 v2

Pyboard is a compact development board that allows you to use the MicroPhyton software. Min. 3-axis accelerometer (MMA7670), diodes, monostable buttons and microSD memory card slot. Adafruit 3497

LCD touch screen with 160x128 pixel resolution, LCD160CR (I2C or UART and SPI) display controller. Adafruit 3498

BB Black Expansion CAPE, Features RS485 and CAN Interfaces

Printed circuit board and programmed soft start system for DC motors. AVT1955 A +

NVIDIA development kit with the Tegra X2 SoC chip containing two Denver cores, four 64-bit ARM Cortex A57 cores and a Pascal graphic layout consisting of 256 cores supporting CUDA technology. Jetson TX2 Development Kit

A set of PCBs with a programmed layout for the LED thermometer - version 27mm green. AVT1697 / 2 / G A +

AVT kit for self-assembly of the LED thermometer - 27mm green version. AVT1697 / 2 / GB

Assembled LED thermometer - 27mm green version. AVT1697 / 2 / GC

EP 06/2017