- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
The pyboard LCD display with a touch panel
ID: 565267
5906623470129
LCD touch screen with 160x128 pixel resolution, LCD160CR (I2C or UART and SPI) display controller. Adafruit 3498
Description
Color LCD with resolution 160x128 pixels with backlight with programmable intensity. The display is equipped with a resistive touch panel. The display has a non-standard controller that accepts serial commands via the I2C and UART interfaces, and an SPI to receive unprocessed data. When sending encoded ASCII and UTF-8 characters to the display, it acts as a simple terminal and prints these characters directly on the screen using the current font and color setting. The new lines are handled appropriately along with several basic ANSI escape codes, allowing the display to display REP (MicroPython REPL) (or any other such serial output).
There is a set of special control commands (also sent by I2C and UART) that allow you to perform many operations on the screen, such as drawing basic shapes, setting colors and fonts, downloading JPEG images and obtaining the current status of the touch screen. The SPI display interface can be used to send raw data to pixels at a maximum rate of 30 frames per second.
properties
- Designed for use with pyboard tiles
- Module with integrated backlight power control
- Factory calibrated touch screen
- Communication interfaces: UART, I2C, SPI
- ANSI terminal emulation for the REPL output
- Integrated character fonts
- Character set with UTF-8 functions
- Compact and simple commands based on characters
- Dimensions: 48 x 45x 15.3 mm
- Weight: 18.4 g
565267
Data sheet
- Screen type
- LCD graphic
- Resolution
- 160 x 128 px
- Interface
- I2C/SPI?
- Touch
- Yes
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
2.2" 18-bit color TFT LCD display with microSD card breakout - ILI9340
zł140.38
Delivery date unknown
No product available!
2.4 "TFT LCD touch screen with 320x240 pixel resolution, ILI9341 display controller (SPI interface). The module is additionally equipped with a micro-SD card slot. Adafruit 2478
zł178.33
24h
Available quantity: 2
Available
Other products in the same category (16)
External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01
Retired
No product available!
External enclosure designed to protect, transfer and store data on M.2 SSD drives with NVMe or SATA interface. Unitek S1204B
Retired
No product available!
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Retired
No product available!
The 74LVC1G07GV is a compact, energy-efficient single-channel logic buffer with an open-drain output, designed for digital systems operating within a voltage range of 1.65 V to 5.5 V. It offers fast switching, high drive capability, and stable performance in applications such as LED control, data lines, and interfaces with mixed logic level standards.
Retired
No product available!
100-pin connector (socket) for Raspberry Pi CM4 modules. 0.4 mm pitch, 1.45 mm height
Retired
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1
Retired
No product available!
50 W soldering iron for Bakon BK950D station. Works with soldering tips from the T13 series
Retired
No product available!
T13 soldering tip with a K-type cut tip designed for the Bakon BK950D station
Retired
No product available!
Black metal casing for Raspberry Pi 4 model B minicomputers. Equipped with active cooling ICE Tower Low Profile
Retired
No product available!
HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface
Retired
No product available!
HAT type power supply module with cooling fan designed for Raspberry Pi 4 model B. Provides flexible power supply to the minicomputer via DC 5.5x2.5 mm connector, XH2.54 mm connector, microUSB or USB type C connector
Retired
No product available!
Wall charger with USB and USB type C sockets. Supports QC3.0 + PD3.0 fast charging protocol with a maximum current of up to 3 A. USAMS US-CC085
Retired
No product available!
A spatula for removing prints from the 3D printer table. Made of stainless steel, it is durable and handy
Retired
No product available!
A needle with a diameter of 0.4 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
Retired
No product available!
LCD touch screen with 160x128 pixel resolution, LCD160CR (I2C or UART and SPI) display controller. Adafruit 3498