- Out-of-Stock
Lead-free tin Sn99Cu0.7Ag0.3 0.50mm 250g
ID: 578980
Lead-free tin Sn99Cu0.7Ag0.3 with EVO11 flux, 250 g spool, 0.50 mm diameter. Cynel SAC307-0.50/250
Description
Lead-free tin by Cynel with flux on a spool of 250 g, diameter 0.50 mm. Sn99Cu0.7Ag0.3 alloy produced from the purest raw materials in accordance with ISO EN 9453:2014.
The binder is intended for manual and mechanized soldering in electronics, electrical engineering and other branches where compliance with the RoHS2 directive is required.
Features
Chemical characteristic
- Tin content: approx. 99%
- Copper content: 0.5 to 0.9%
- Silver content: 0.2 to 0.4%
- Maximum pollution:
| Pb | Sb | Bi | Cu | Au | In | Ag | Al | As | Cd | Fe | Ni | Zn |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0,07 | 0,1 | 0,006 | 0,9 | 0,005 | 0,1 | 0,4 | 0,001 | 0,03 | 0,002 | 0,02 | 0,01 | 0,001 |
Physical characteristics
- Melting point: 227°C
- Specific weight: 7.33 g/cm3
- Tensile strength at break: 300 kg/cm2
- Elongation at Break: 22%
- Hardness: 14 HB
- Recommended soldering tip temperature: 340 to 420°C
578980
Data sheet
- Alloy
- Sn99Cu0,7Ag0,3
- Diameter
- 0,50 mm
- Weight
- 250 g
Manufacturer CYNEL-UNIPRESS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Białołęcka 231 B 03-253 Warszawa Poland cynel@cynel.com.pl
Responsible person CYNEL-UNIPRESS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Białołęcka 231 B 03-253 Warszawa Poland formularz kontaktowy na stronie osoby odpowiedzialnej
You might also like
Solder tape used to collect excess tin, 1 mm wide, 1.5 m long
zł5.79
24h
Available quantity: 8
Available
The sucker is a tool necessary to remove excess brazing material during desoldering of electronic components. NAR0032
zł7.48
Delivery date unknown
No product available!
Tape, in the form of a braid, to remove the excess of molten solder brazing material during soldering and desoldering of electronic components 1.5m
zł5.95
24h
Available quantity: 9
Available
Tape, in the form of a braid, for removing excess molten solder binder when soldering and desoldering electronic components, 1.5mm wide and 1.5m long.
zł4.17
24h
Available quantity: 30
Available
Other products in the same category (16)
Development kit with TLV493D sensor. The board has a built-in J-Link programmer, XMC1100 microcontroller (Cortex-M0, 64kB Flash memory, 16kB RAM) and a three-plane magnetic field sensor TL493D. TLV493D-A1B6 2 GO KIT
Retired
No product available!
No product available!
Nikon F-Mount lens mount adapter for C-Mount Raspberry Pi HQ. ArduCAM UB0218
Retired
No product available!
PCB and programmed arrangement for a microprocessor fear for birds. AVT3135 A +
Retired
No product available!
Female terminal block, 2-pin. Pitch 3.5mm. Height 15.6mm. KF2EDGK
Retired
No product available!
CuteDuino Attiny85 - module with Attiny85 microcontroller
Retired
No product available!
A set with a base plate equipped with an LCD display, a microphone and a QVGA camera with a HM01B0 sensor. Designed for applications using machine learning and Tensorflow Lite for the Raspberry Pi Pico. ArduCAM U6180
Retired
No product available!
Wires with Pre-crimped Terminals 50-Piece Rainbow Assortment M-F 12"
Retired
No product available!
No product available!
The FXLN8361 three-axis accelerometer is a module with the FXLN8361 accelerometer system detecting the acceleration of an object during three-axis motion. The module can be supplied with voltage in the range of 3.3 ... 8V and provides two measuring ranges ± 2g and ± 8g. DFRobot SEN0178
Retired
No product available!
Side panel with I/O elements for Totem Mini Lab and Totem Micro Lab sets. There are buttons, potentiometers, LED diodes and a relay on the board. Totem TE-SP01-B
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Lead-free tin Sn99Cu0.7Ag0.3 with EVO11 flux, 250 g spool, 0.50 mm diameter. Cynel SAC307-0.50/250