- Out-of-Stock
Lead-free tin Sn99Cu0.7Ag0.3 0.5mm 500g
ID: 578981
Lead-free tin Sn99Cu0.7Ag0.3 with EVO11 flux, 500 g spool, 0.5 mm diameter. Cynel SAC307-0.5/500
Description
Lead-free tin by Cynel with flux on a spool of 500 g, diameter 0.5 mm. Sn99Cu0.7Ag0.3 alloy produced from the purest raw materials in accordance with ISO EN 9453:2014.
The binder is intended for manual and mechanized soldering in electronics, electrical engineering and other branches where compliance with the RoHS2 directive is required.
Features
Chemical characteristic
- Tin content: approx. 99%
- Copper content: 0.5 to 0.9%
- Silver content: 0.2 to 0.4%
- Maximum pollution:
| Pb | Sb | Bi | Cu | Au | In | Ag | Al | As | Cd | Fe | Ni | Zn |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0,07 | 0,1 | 0,006 | 0,9 | 0,005 | 0,1 | 0,4 | 0,001 | 0,03 | 0,002 | 0,02 | 0,01 | 0,001 |
Physical characteristics
- Melting point: 227°C
- Specific weight: 7.33 g/cm3
- Tensile strength at break: 300 kg/cm2
- Elongation at Break: 22%
- Hardness: 14 HB
- Recommended soldering tip temperature: 340 to 420°C
578981
Data sheet
- Alloy
- Sn99Cu0,7Ag0,3
- Diameter
- 0,50 mm
- Weight
- 500 g
Manufacturer CYNEL-UNIPRESS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Białołęcka 231 B 03-253 Warszawa Poland cynel@cynel.com.pl
Responsible person CYNEL-UNIPRESS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Białołęcka 231 B 03-253 Warszawa Poland formularz kontaktowy na stronie osoby odpowiedzialnej
You might also like
Solder tape used to collect excess tin, 1 mm wide, 1.5 m long
zł5.79
24h
Available quantity: 9
Available
The sucker is a tool necessary to remove excess brazing material during desoldering of electronic components. NAR0032
zł7.48
Delivery date unknown
No product available!
Tape, in the form of a braid, to remove the excess of molten solder brazing material during soldering and desoldering of electronic components 1.5m
zł5.95
24h
Available quantity: 9
Available
Tape, in the form of a braid, for removing excess molten solder binder when soldering and desoldering electronic components, 1.5mm wide and 1.5m long.
zł4.17
24h
Available quantity: 30
Available
Other products in the same category (16)
No product available!
No product available!
A universal multimeter allows you to measure direct and alternating voltage, direct and alternating current, resistance and frequency. Equipped with diode tester, circuit continuity test, automatic circuit breaker, NCV test and Hold functions. Uni-T UT136D
Retired
No product available!
Permanent cylindrical neodymium magnet with a diameter of 6 mm and a height of 4 mm.
Retired
No product available!
Aluminum tensometer beam, allowing weight measurement up to 2 kilograms. It has four wires. It is used in kitchen scales and portable scales
Retired
No product available!
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Green
Retired
No product available!
WIFI-LPT100-B is a small module that enables communication using a wireless WiFi network. It has a UART interface, and is characterized by low energy consumption.
Retired
No product available!
NetFPGA-SUME Virtex-7 FPGA Development Board. The amazingly advanced board that features one of the largest and most complex FPGA’s ever produced, a Xilinx Virtex-7 690T supporting thirty 13.1 GHz GTH transceivers. 410-301
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,311mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMS179 sensor with a wide-angle lens with a viewing angle of 150°. ArduCAM UB0233
Retired
No product available!
Graphic LCD 240x128, 101.3x76.3mm, COG, negative blue, 3.3V, UC1608
Delivery date unknown
No product available!
8x2 Character LCD - Black Bezel (Parallel Interface)
Retired
No product available!
No product available!
Snap-Action Switch with 15.6mm Bump Lever: 3-Pin, SPDT, 5A
Retired
No product available!
Meet the Roadster MK3 from the 2.5D Classic Vehicles collection—the first series in our new line of Ugears 2.5D puzzles! This beautiful DIY 2.5D wooden picture model has movable elements and comes in its own frame, suitable for hanging on a wall or standing on a desk or shelf. The Roadster MK3 depicts a classically-styled muscle car, and will be an attractive addition to your home or office decor. This automotive picture model comes to life with a side door that opens, wheels that turn, hood and boot that open and close, and a movable stick shifter. UGears 70195
Retired
No product available!
Lead-free tin Sn99Cu0.7Ag0.3 with EVO11 flux, 500 g spool, 0.5 mm diameter. Cynel SAC307-0.5/500