Category: RETIRED PRODUCTS

Dispensing needle for precise application of glue, flux with an internal diameter of 0.2mm and an external diameter of 0.4mm.

Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.

Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075

A network card that supports two WiFi frequency bands (2.4GHz and 5GHz) with a USB connector. It allows you to connect devices without an internal network adapter to the WiFi network. TP-LINK AC600

Integrated capacitive fingerprint sensor communicating with the external system via the UART interface. The module has a rectangular sensor field and downloads a fingerprint image with a resolution of 508dpi. Waveshare UART Fingerprint Sensor (R)

Sipeed MAIX Bit is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110991190

Module with 12.48" e-Paper display and 1304x984 px resolution. Communicates with external systems via the SPI interface. It has low power consumption and a wide viewing angle. Waveshare 12.48inch e-paper Module

Dispensing needle for precise application of glue, flux with an internal diameter of 0.3mm and an external diameter of 0.55mm.

RoboClaw 2x60AHV Motor Controller (V7C) is a two-channel DC motor driver, operating voltage: 10,5 to 60V, maximum continuous current: 60A, the ability to easily implement feedback loops with PID controller, security systems. Pololu 3583

Gate driver in uWiFi technology with extended range, with application for Android/iOS. BleBox GateBoxPro

Camera module with MT9J003 sensor cooperating with ArduCam USB Shield. The maximum video resolution is 3856x2764 pixels. LS-18023 lens mount possible. ArduCam A0096

A 150mm 2-wire cable terminated terminated with a plug and socket JST XH2.54.. 22AWG cable diameter.

Digital microscope with 3" LCD display and HDMI output. The microscope is equipped with a 3MPx image sensor with a magnification factor up to 300 times. Andonstar ADSM201

120W power supply, 24VDC output voltage and 5A output current. Mounting on a DIN rail. Built-in overload and short circuit protection. MEAN WELL DR-120-24

A hand-held thermal imaging camera with a 2.4" LCD screen. It measures the temperature in the range from -20 to 300°C. HTI HT-02D

Dispensing needle for precise application of glue, flux with an internal diameter of 0.25mm and an external diameter of 0.5mm.

Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.

Four-wheeled chassis for self-assembly. The kit contains all the necessary mechanical elements that are needed to build this type of structure. SeeedStudio Robot car Kit- RC Smart Car Chassis Kit

The computer with Intel Core M3-8100Y processor, has 8GB RAM. It has Wi-Fi, Bluetooth 4.0, Ethernet, as well as Intel HD Graphics. It can support the SSD drive. Has support for Windows 10 and Linux. DFRobot DFR0545

STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: I-NUCLEO-LRWAN1 and LRWAN_GS_HF1. STMicroelectronics P-NUCLEO-LRWAN2