- Out-of-Stock
Hand-held thermal imaging camera with a 2.4" LCD display. It measures the temperature in the range of -20 to 300°C. The thermal imaging camera works based on the phenomenon of invisible infrared radiation, i.e. the so-called electromagnetic wave energy detection. It combines the function of measuring surface temperature and real-time imaging.
The camera is equipped with a microSD card slot and the ability to save photos on a card in BMP format.

It also has a threaded hole so it can be easily mounted on a tripod.
The camera measures the entire visible area and displays the temperature of three points: central and maximum and minimum. It is also possible to preview the real image of the tested object.

Attention!
The set does not contain AA batteries needed to power the device. They must be purchased separately.Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Panasonic Eneloop PRO R6/AA rechargeable batteries with a minimum capacity of 2500mAh and a voltage of 1.2V. The set contains two pieces sold in blister packaging. Panasonic BK-3HCDE/2BE
Kit containing the Panasonic Eneloop BQ-CC55 charger and 4 Panasonic Eneloop R6/AA rechargeable batteries with 2000 mAh capacity. Panasonic K-KJ55MCC40E
AA/LR6/R6 alkaline battery with 1.5V voltage. 6 pcs. GP15AU
Set of 4 Panasonic Eneloop R6/AA rechargeable batteries with a capacity of 2000 mAh and voltage of 1.2V. Packaged in eco-friendly packaging (blister). Panasonic BK-3MCDE/4BE
No product available!
No product available!
Set with six microphones designed for audio applications for Raspberry Pi minicomputers. It consists of a board with microphones and a module with audio circuits. Seeed Studio 107990055
No product available!
No product available!
Signal analysis kit including the Analog Discovery 2, Analog Discovery BNC adapter, BNC probes and necessary accessories. Digilent 240-123
No product available!
No product available!
No product available!
No product available!
NanoPi NEO Core is a small PCB equipped with the SoC Allwinner H3 chip and 512MB RAM. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C, I2S interface. The board can be powered from the Micro USB connector. FriendlyELEC NanoPi NEO Core
No product available!
AVT kit for self-assembling LEDs, contains a set of elements. AVT1844 B
No product available!
Development kit chipKIT DP32 equipped with PIC32MX250F128B microcontroller (40/50 Mhz, 128 kB Flash, 32 kB RAM), prototype area with solder pads, potentiometer, 4 LED diodes, 2 buttons and soldering pads for EEPROM memory and analog temperature sensor. Digilent 410-280P-KIT
No product available!
Flat USB cable A - micro-B USB with a length of 1 m, cable in red
No product available!
No product available!
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT
No product available!
MYIR MYC-C7Z010 is a single board module based on the MYC-C7Z010 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
No product available!
Marek Galewski
https://kamami.pl/arm/197735-stm32-aplikacje-i-cwiczenia-w-jezyku-ce-book.html
https://kamami.pl/arm/574871-stm32-aplikacje-i-cwiczenia-w-jezyku-cz-biblioteka-hal.html
No product available!
A hand-held thermal imaging camera with a 2.4" LCD screen. It measures the temperature in the range from -20 to 300°C. HTI HT-02D