- Out-of-Stock

Module with e-Paper display with a 12.48" diagonal and a resolution of 1304x984 px. It communicates with external systems via the SPI interface. It is characterized by low power consumption and a wide viewing angle. The module has a connector compatible with Raspberry Pi, STM32, Arduino and ESP32.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The DC motor driver allows you to control a motor with a voltage in the range of 6 to 28V, the motor can draw up to 60A. Controlled by PWM modeling, it can be used in robotics, small electric vehicles. Digilent 410-334-2
No product available!
PECEL ATMEGA8535 MICROCOMPUTER WITH PROCESSOR - PRINTED PLUG AND PROGRAMMED SYSTEM
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
No product available!
The Bluetooth module complies with the Bluetooth SPP specification and the Bluetooth 2.1 + EDR standard. Powered by 3.3/5V.
No product available!
No product available!
AHRS module (Attitude Heading Reference System) for Computers Odroid C1, C1 +, C0, C2, XU3, XU4
No product available!
16GB microSDHC Memory Card with SD Adapter, class 10, Kingston
No product available!
Complete starter kit for Raspberry Pi 3 model B +: computer + official housing + official power supply + 16GB microSD card with OS NOOBS
No product available!
Female terminal block, 3-pin. Pitch 3.5mm. Height 15.6mm. KF2EDGK
No product available!
Digital mono audio amplifier based on the TPA3118 chip. It has one channel with a power of 60 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 12 to 24 V
No product available!
Odroid N2 4 GB CoreELEC Edition is a ready-made kit that allows you to build a home entertainment center (media center), based on the ODROID N2 minicomputer with 4 GB of RAM.
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3200 mAh. Akyga AKY0926
No product available!
No product available!
No product available!
No product available!
Module with 12.48" e-Paper display and 1304x984 px resolution. Communicates with external systems via the SPI interface. It has low power consumption and a wide viewing angle. Waveshare 12.48inch e-paper Module