- Out-of-Stock

BleBox GateBoxPro is a ready-to-use module that allows you to close and open garage doors and check their status via WiFi using the smartphone application from anywhere in the world. In order to use BleBox, you only need to configure the device via a web browser. The small dimensions allow the module to be enclosed in the gate drive controller housing.
GateBoxPro is an extended version of the GateBox controller with an extended range and increased water resistance class.
The device has screw connectors for cable assembly, the small dimensions allow the module to be closed in an electrical box.
To connect the module to your home WiFi network, you need to connect your computer to the WiFi network created by the BleBox module. Then just start the web browser and enter the device's IP address: http://192.168.4.1. On the configuration page, select the home WiFi network and enter the password.
Using the Google play or AppStore, download the wBox – control everything application. If the WiFi network has been correct configured, the module will be automatically detected by the application.
Controller of electric bolts and electro-catch. The module can be controlled via a WiFi network using the smartphone application from anywhere in the world. BleBox DoorBox
Integrated controller for rolling gates in uWifi technology with an Android/iOS application. BleBox Rollergate
Assembled thermostat with LED display. AVT3220 C
No product available!
Mike Riley
No product available!
No product available!
8x2 Character OLED Display, 58x32, Negative Black Surface, Yellow Dot, 5V, RoHS
No product available!
No product available!
No product available!
No product available!
Display 2x24, 118x36 mm, FSTN, extended temperature range "fast"
No product available!
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
No product available!
No product available!
No product available!
No product available!
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with a camera and USB Type-C to M.2 adapter. Seeed Studio 102991335
No product available!
The UT203 clamp meter is designed for measuring AC and DC current, AC and DC voltage, resistance and frequency. It is equipped with a relative measurement function, Hold function and automatic range change. Uni-T UT203
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 102.083:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 6533 counts per revolution of the gearbox’s output shaft.
No product available!
Gate driver in uWiFi technology with extended range, with application for Android/iOS. BleBox GateBoxPro