Turnigy Trackstar 1/10 45A Sensorless Car Esc

EdW 04/2018

Permanent cylindrical neodymium magnet with a diameter of 10 mm and a height of 2 mm.

2.13" e-Paper display module with 212x104 resolution. The display is connected to a small board with a 40-pin Raspberry Pi compatible connector. The module has the ability to display in three colors: black, white and yellow. Waveshare 2.13inch e- Paper HAT (C)

FreeSoC2 board has two processors on-board: a CY8C5868LTI-LP039 and a CY8C5888AXI-LP096. The former serves as a debugger/programmer for the latter, which is the target upon which your application code will be installed. Both parts contain a Cortex-M3 processor core, 256kB of flash memory, 64kB of SRAM, and 2kB of EEPROM. DEV-13229

Bruce Carter, Ron Mancini

Switch-mode power supply (constant voltage) with an output voltage of 12 V and a maximum current of 1.5 A. The cable terminated with a DC 5.5x2.5 plug

This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.

Aluminum case designed for Raspberry Pi Zero W minicomputers. The user has free access to all minicomputer ports, including GPIO connectors