- Out-of-Stock
NTM Prop Drive 28-36 1000KV / 400W Brushless Motor (25075)
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory (our) prices! All performance figures are real and tested on our own motor dynos.
Our QC engineers check and balance each motor before shipping to the HobbyKing.com warehouse.
Specs:
Model: NTM Prop Drive Series 2836 1000kv
Kv: 1000rpm/v
Poles: 3
Motor Wind: 14T
Max current: 30A
Max Power: 400W
Shaft: 4mm
Weight: 89g
ESC: 30~40A
Cell count: 3s~6s Lipoly
Bolt holes: 16mm & 19mm
Bolt thread: M3
Connection: 3.5mm Bullet-connector
Prop Test Data:
11x7E - 11.1V / 220W / 20A / 976g thrust
11x7E - 14.8V / 412W / 27.7A / 1.485kg thrust
12x6E - 11.1V / 215W / 20A / 1.08kg thrust
12x6E - 14.8V / 430W / 29A / 1.42kg thrust
13x4E - 11.1V / 223W / 20A / 1.06kg thrust
13x4E - 14.8V / 400W / 27A / 1.48kg thrust
Note: An accessory pack is available for this motor. Please see the related items below.
PRODUCT ID: NTM2836-1000
Download
| Customer files | ||
| No File Name | 2139kb | |
| No File Name | 293kb | |
Manufacturer
Responsible person
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
No product available!
Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
No product available!
A two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302
No product available!
Starter Cable Kit for Spacely Carrier. Connect Tech CKG045
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
No product available!
Starter Cable Kit for Astro Breakout Board. Connect Tech CKG041
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. The board is equipped with a Mini PCI Express and mSATA connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG001
No product available!
A network card that supports two WiFi frequency bands (2.4GHz and 5GHz) with a USB connector. It allows you to connect devices without an internal network adapter to the WiFi network. TP-LINK AC600
No product available!
Integrated capacitive fingerprint sensor communicating with the external system via the UART interface. The module has a rectangular sensor field and downloads a fingerprint image with a resolution of 508dpi. Waveshare UART Fingerprint Sensor (R)
No product available!
Sipeed MAIX Bit is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110991190
No product available!
Based on MAIX Module, the Maixduino is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110110044
No product available!
Module with 12.48" e-Paper display and 1304x984 px resolution. Communicates with external systems via the SPI interface. It has low power consumption and a wide viewing angle. Waveshare 12.48inch e-paper Module
No product available!
RoboClaw 2x60AHV Motor Controller (V7C) is a two-channel DC motor driver, operating voltage: 10,5 to 60V, maximum continuous current: 60A, the ability to easily implement feedback loops with PID controller, security systems. Pololu 3583
No product available!
HK NTM Prop Drive 28-36 1000KV / 400W Brushless Motor (25075)