Category: RETIRED PRODUCTS

QLED IPS 9" display with a touch screen and Quantum Dot technology. The display is equipped with an HDMI interface for image display and USB for the touch panel. Resolution 1280x720 pixels. Waveshare 9HP-CAPQLED

A needle with a diameter of 0.4 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle

100-pin connector (socket) for Raspberry Pi CM4 modules. 0.4 mm pitch, 1.45 mm height

Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1

50 W soldering iron for Bakon BK950D station. Works with soldering tips from the T13 series

T13 soldering tip with a K-type cut tip designed for the Bakon BK950D station

Black metal casing for Raspberry Pi 4 model B minicomputers. Equipped with active cooling ICE Tower Low Profile

HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface

HAT type power supply module with cooling fan designed for Raspberry Pi 4 model B. Provides flexible power supply to the minicomputer via DC 5.5x2.5 mm connector, XH2.54 mm connector, microUSB or USB type C connector

Wall charger with USB and USB type C sockets. Supports QC3.0 + PD3.0 fast charging protocol with a maximum current of up to 3 A. USAMS US-CC085

A spatula for removing prints from the 3D printer table. Made of stainless steel, it is durable and handy

Connector for connecting the 22-pin tape with 0.5 mm pitch to the printed circuit board. F0500WR-S-22PB

A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and two sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM511

Aluminum tensometer beam, allowing weight measurement up to 2 kilograms. It has four wires. It is used in kitchen scales and portable scales

Educational set for building robots based on Totem construction elements. Designed for beginners, it allows you to create 7 robot structures based on the included assembly instructions. Totem TKR-RK1

A computer adapter (USB, Ethernet, WiFi) that works as a 4-channel oscilloscope, a 16-channel logic analyzer and a programmable signal generator. Includes BNC probes. Digilent 471-040

A computer adapter (USB, Ethernet, WiFi) that works as a 2-channel oscilloscope, a 16-channel logic analyzer and a programmable signal generator. Includes BNC oscilloscope probes. Digilent 471-041

Transistor tester dedicated to work with Analog Discovery 2 and Analog Discovery (Legacy) devices. It allows you to draw the characteristics of such elements as diodes, NPN and PNP transistors as well as P and N FET transistors. Digilent 410-413

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM331

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM332