- Out-of-Stock
Li-Ion Xtar 18650 3,6V 3000mAh battery with protection
ID: 579127
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3000mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
Description
Li-Ion 18650 battery with a nominal voltage of 3.6 V and a capacity of 3000 mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
Attention!
The battery is marked by the manufacturer as 18650, but due to the circuit protection system it is approx. 4 mm longer than the standard 18650 battery, which may not fit baskets and devices intended for 18650 batteries.
The battery is marked by the manufacturer as 18650, but due to the circuit protection system it is approx. 4 mm longer than the standard 18650 battery, which may not fit baskets and devices intended for 18650 batteries.
Features
- Li-Ion battery (Li-Ion)
- Type: 18650
- Nominal voltage: 3.6 V
- Minimum capacity: 3000 mAh
- Maximum charging current: 1,5 A
- Maximum charging voltage: 4.25 V
- Maximum discharge current: 4,5 A
- Protection against overcharging, excessive discharge, overload and short circuit
- Dimensions: 18.4 x 69.2 mm
579127
Manufacturer Baltrade sp. z o.o. Geodetów 24 80-298 Gdańsk Poland baltrade@baltrade.pl
Responsible person Baltrade sp. z o.o. Geodetów 24 80-298 Gdańsk Poland baltrade@baltrade.pl
You might also like
Microprocessor charger with balancer (12 V DC supply), loads LiIon, LiPo, LiFe, Ni-Cd, Ni-MH, PB packs.
zł92.15
Delivery date unknown
No product available!
Li-Ion 18650 battery with a nominal voltage of 3.7V and a capacity of 2600mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
zł23.90
24h
Available quantity: 17
Available
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3500mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
zł49.94
24h
Available quantity: 3
Available
Two-channel processor charger designed for Li-Ion cylindrical batteries in various sizes (including 18650). It can charge batteries both with PCM protection and without protection. The nominal charging current in the main phase is 0.5A per channel. XTAR MC2
zł24.78
24h
Available quantity: 3
Available
Fast XTAR SC1 processor charger for lithium-ion cells in sizes 18650, 18700, 20700, 21700, 22650, 26650. It is equipped with LEDs showing the state of charge, three-stage charging processor TC / CC / CV, function of reacting deeply discharged cells, security: short-circuit, thermal, against reverse polarity. It can be charged with any USB power charger (min. 2.1A)
zł23.03
24h
Available quantity: 2
Available
The XTAR VC2 charger is a two-channel charger for lithium-ion (Li-ion) cells with a micro USB charging input. Each channel is independent. The VC2 has a large LCD screen showing charging voltage and current. The charger also shows the capacity that is delivered to the cell and displays the result on the screen
zł48.60
24h
Available quantity: 4
Available
Case for two 18650 batteries connected in series (7.4 V). Equipped with a flap and a switch
zł2.71
24h
Available quantity: 41
Available
Other products in the same category (16)
Module with a black and white e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM368
Retired
No product available!
No product available!
AA Kilbas, HM Srivastava, JJ Trujillo
Delivery date unknown
No product available!
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
No product available!
No product available!
Development board with the PSoC5LP ARM Cortex system. Equipped with two processors: the CY8C5868LTI-LP039 debugger / programmer and the system supporting the application code CY8C5888AXI-LP096. Both processors are based on the Cortex-M3 core and have 256kB flash memory, 64kB SRAM and 2kB EEPROM. Sparkfun DEV-13714
Retired
No product available!
Atlas-SoC Kit starter kit with the System-on-Chip system from the Cyclone V SoC family, in which, among others, dual core ARM Cortex-A9 processor (with a frequency of 925 MHz) and a large FPGA matrix (40,000 logic elements). Terasic P0419
Retired
No product available!
Camera module with MT9J003 sensor cooperating with ArduCam USB Shield. The maximum video resolution is 3856x2764 pixels. LS-18023 lens mount possible. ArduCam A0096
Retired
No product available!
The YATO electronic caliper is an excellent choice for professionals looking for a precise and reliable measuring tool. Durable construction and advanced measurement technology ensure high accuracy and ease of use in all conditions. Yato YT-7201
Retired
No product available!
No product available!
Thermal imaging camera with a 2.4" LCD display. It measures the temperature in the range from -10 to 400°C. Uni-T UTi80P
Retired
No product available!
Motion sensor module dedicated to home automation systems. It allows monitoring of ambient heat (infrared band) and ambient light intensity and generates events when a sudden change is detected. Adaprox LKMSZ011
Retired
No product available!
No product available!
Module with GP2Y0D805Z0F proximity sensor, which can detect the presence of objects in the range from 0.5 to 5 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020533
Retired
No product available!
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3000mAh. It has protection against overcharging, excessive discharge, overload and short circuit.