The Step-Down D24V6AHV Buck Voltage Regulator module with adjustable output voltage in the range of 4-25V with a wide input voltage range of 4.5-42V and a maximum output current of 600 mA. Pololu 2104

LED strip with addressable RGB WS2813 diodes on a white PCB. It is powered by 5 V DC, has a length of 1 m and 144 LEDs/m. Protection level IP30

VNH5019 Motor Driver Carrier

THT resistor, 0.25W, 5%, RoHS

The temperature and humidity sensor with RS485 Modbus interface is a precise measuring device, ideal for industrial automation systems, easily integrated thanks to the Modbus RTU protocol. Mounted on a DIN rail, it measures temperature from -40°C to 80°C and humidity up to 100% RH, providing reliable data in harsh environmental conditions.

Dual MC33926 Motor Driver CarrierTwo-channel DC motor controller with voltage from 5 V to 28 V, power consumption up to 3 A per channel. Controlled by PWM signal. Pololu 1213

The Pololu 785 60 cm servo extension with a flat cable and female JR connectors allows flexible connection of devices with 3-pin 2.54 mm pitch connectors. It facilitates the integration of RC systems, control modules, and sensors in robotic and modeling projects.

CS-Mount lens. 16 mm focal length, 24° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN050

Fisheye lens with M12 mount included with the adapter. Focal length 1.56 mm and FoV 180°. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN031

Wide-angle lens with M12 mount included with the adapter. Focal length 3.56 mm and FoV 90°. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN033

Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1

M12 mount lens included with adapter. 25 mm focal length and 20° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN036

SO16

Set of 6 lenses with M12 mount included with adapter and accessories. Designed to work with the Raspberry Pi HQ camera. ArduCAM LK003

THT resistor, 0.25W, 5%, RoHS

A small tripod with 1/4" mounting screw designed for Raspberry Pi HQ Camera. Pocket-sized and very lightweight, withstands loads up to 1kg. ArduCAM UB0216

The Pololu 780 30 cm servo extension with two female JR connectors enables flexible connection of devices with 3-pin 2.54 mm pitch connectors. The twisted-wire construction reduces EMI interference, and compatibility with RC standards makes it suitable for modeling, robotics, and control systems.

Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min

Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.