Round TFT display with capacitive touch panel. It has a 2.1-inch screen with a resolution of 480x480 pixels. It uses the ST7701S controller. To control it, it requires a system with high computing power and an appropriate amount of memory. Adafruit 5792

Round TFT display with a diagonal of 2.1" and a resolution of 480x480 pixels. Uses the ST7701S controller. For control, it requires a system with high computing power and an appropriate amount of memory. Adafruit 5806

32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-144

32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, 64-LQFP

32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 256kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, 64-LQFP

7-port HUB with a USB 3.0 interface intended for use in industry. It allows data transfer at speeds of up to 5 Gb/s. Requires an external 12 V power supply with a current capacity of up to 3 A. Enclosed in a metal housing with the option of wall mounting. Sipolar A-173

Single operational amplifier STMicroelectronics LMV321LILT type Rail-to-Rail. It is designed to work with low supply voltages (supply voltage range 2.7V-5V), the maximum current consumption of the system is 250uA (at 5V voltage). System in the SOT23-5 housing

Quadruple programmable frequency generator by Silicon Labs in the range of 5 to 350MHz. Communication with the system can take place via the I2C bus. The system is housed in the QFN24 housing

Miniature (25x40mm) WiFi b / g / n module with 2.0mm goldpin connection with TCP and UDP protocols operating in standalone and access point mode. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V. HF-A11-1

Prototype contact plate 170 points, 35x47 mm in light green color. PPS0170 GREEN

Prototype contact plate 170 points 35x47 mm in black color. PPS0170 BLACK

Miniature (25x40mm) WiFi b/g/n module for surface mounting with support for TCP and UDP protocols operating in standalone and access point modes. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V

32-bit microcontroller from the STM32F0 family with ARM Cortex-M0 core, 32kB Flash memory, 16kB RAM, 48MHz, I2C, SPI, UART / USART, USB, DMA, POR, PWM, WDT, 2.4 ... 3.6 V, A / D 13x12b, 20-TSSOP

32-bit microcontroller from the STM32L4 family with ARM Cortex-M4 core, 1MB Flash memory, 128kB SRAM, 48MHz, I2C, SPI, UART / USART, USB, CAN, SWPMI, 1.71 ... 3.6V, 64LQFP, STM, RoHS

The 15.6" IPS LCD display with capacitive touch panel is a 1920×1080 resolution screen that supports USB Type-C or HDMI input signals. It is compatible with single-board computers such as LattePanda Sigma, LattePanda Alpha, LattePanda Delta, Raspberry PI 4B and Jetson Nano, as well as various types of desktop computers, laptops, mini computers, industrial computers and tablets. DFRobot DFR1045

3D camera module with ToF technology and the ability to record images in RGB color with a resolution of 320 x 240 pixels. Additionally, it is equipped with an IMU measurement system. The camera enables easy acquisition of RGB-D data via a USB cable and, when combined with a web interface, enables viewing of depth maps, point cloud data, and rendering of colored 3D objects in real time. DFRobot SEN0583

Matrix display module with a Raspberry Pi Pico W control board. It has built-in 256 RGB LEDs in a 16 x 16 arrangement, an amplifier with a speaker and buttons. Perfect for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM676

Module with a mechanical encoder and RGB backlight in the form of 24 colorful LEDs. It offers five buttons and a rotary encoder. For communication, it uses a Qwiic/Stemma QT connector or a connector compatible with the Breakout Garden system. It is perfect, for example, for controlling lighting. Pimoroni PIM673

Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels. It is equipped with a 40-pin GPIO connector and can work with Raspberry Pi minicomputers. It communicates via the SPI interface. Pimoroni PIM667

Transparent prototype contact board with 400 points, dimensions 82x55x10 mm, with double-sided adhesive tape. PPS0400T