High-Flying HF-A11-SMT-1 - WiFi module b/g/n

WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S

ArduCAM CC3200 UNO Board CC3200 UNO is full featured development board almost like a combination of CC3200 Launchpad plus CC3200CAMBOOST pack from TI while keeping exactly the same size as Arduino UNO and pin out. B0078

The expansion board (shield) with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-18567

Wireless-BE200 is a modern Wi-Fi 7 network card with an M.2 E Key interface, offering high throughput across three frequency bands and Bluetooth 5.4 for versatile wireless connectivity. With advanced technologies such as MU-MIMO and WPA4, it is ideal for upgrading computers, development kits, and modern embedded systems with fast and secure network access.

SPWF01SC are intelligent Wi-fi modules. Thanks to the Plug-And-Play solution and the autonomous 802.11 b/g/n solution, the module has the ability to easily integrate the wireless function with existing or new products.

Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979

Intel\'s AX210 wireless communication module. It supports 802.11AX Wi-Fi Generation 6E and Bluetooth 5.2, and comes with an M.2 A/E Key connector. Waveshare Wireless-AX210

UART to Wi-Fi 802.11 b/g/n converter module with external antenna, which can connect traditional serial device and MCU controlled device to Wi-Fi network for control and management. USR-WIFI232-B2

Low power Wi-Fi module integrating wireless LAN and Cortex-M4 STM32F411CE microcontroller. It has 2 MB external flash memory, 512 KB bytes embedded flash memory, 128 KB RAM and peripherals. Seeed Studio 113990108

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

WiFi module for FriendlyELEC computers

WiFi module, IEEE802.11b / g / n, I-PEX connector, High-Flying, RoHS

The Raspberry Pi RMC20452T is a Wi-Fi 4 and Bluetooth 5.2 module designed for use with Raspberry Pi microcontrollers like the RP2040. It offers low power consumption and simple integration thanks to its gSPI interface and full radio certification. Ideal for IoT projects, home automation, and wireless communication systems

Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05

Wifi module with ESPR8266 ESPRESSIF for communication in the 2.4 GHz band. It is powered by a voltage from 3 V to 3.6 V, available in an SMD enclosure. ESP-WROOM-02

WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a built-in chip antenna and 2.54 mm pitch connectors, which greatly facilitate prototyping. Tibbo WA2000C