Sound recording module with I2C interface. It can store sounds up to 100 seconds long. DFRobot SEN0197

N-channel 120V 7.9mΩ standard level MOSFET in TO220, TO-220AB, NXP, RoHS

A module that allows you to connect four cameras to a Raspberry Pi. It supports cameras with MIPI interface with a resolution of 5 Mpx, 8 Mpx and 12 Mpx. Arducam B012001

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm and 22AWG intended for logic analyzers Saleae.

The holder allows for quick connection of the fuse to the device\'s power supply. The threaded design and wires on both sides facilitate installation in DIY projects, vehicle installations, and electronic module power systems. Suitable for building and servicing systems requiring individual current protection

32-bit microcontroller with ARM Cortex-M4 core MCU + FPU, Ultra-low-power, 2MB Flash memory, 640KB SRAM memory, LCD-TFT & MIPI DSI, LQFP144, STM

A set of connectors used in the Breakout Garden modules from Pimoroni. Designed for soldering on PCBs. Pimoroni COM3900

An 8-channel LoRaWAN gateway designed for indoor IoT installations, based on the Semtech SX1302 chip and the MediaTek MT7628 processor. It provides a communication range of up to 10 km and supports the EU868 and US915 bands, enabling simultaneous operation with multiple end devices. The gateway offers Wi-Fi, Ethernet, Bluetooth, and optional 4G connectivity and is compatible with TTN and ChirpStack platforms. Elecrow ThinkNode G1

The Arducam B0462 camera module with the GC2145 color sensor offers 2 MP image capture with low power consumption. Its wide compatibility with the Arduino GIGA R1 platform makes it suitable for use in embedded systems, robotics, and real-time image analysis.

The Arducam B0463 camera with the OV7675 sensor captures images in VGA resolution and RGB/YUV format, enabling use in vision systems based on Arduino GIGA R1. Its compact design and low power consumption make it suitable for battery-powered projects and applications in robotics and IoT.

HDMI / micro HDMI plug-in cable (AD) from Kruger & Matz, allows you to connect the latest generation of Micro HDMI devices to displays equipped with an HDMI connector. KM0327

Stretch sensor in the form of a conductive rubber cord with a length of 3m and a diameter of 2mm, changing resistance depending on the amount of stretch, supplied with accessories for simple analog measurements. Adafruit 6379

4-color e-Paper display with a diagonal of 2.66" and a resolution of 360x184 px. It uses communication via the SPI interface. The set includes only the display without a PCB. Waveshare 2.66inch e-Paper (G)

3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi, 320×480 resolution. Waveshare 3.5inch RPi LCD (A)

Connection cable with two JST SH 1mm 3-pin plug connectors, plug-plug type, 200mm long, designed for linking modules and boards with compatible JST SH sockets. Adafruit 6406

FRAM chip has 64 Kbits (8 KBytes) of storage, interfaces using SPI, and can run at up to 20MHz SPI clock rates. Each byte can be read and written instantaneously (like SRAM) but will keep the memory for 95 years at room temperature. Adafruit 1897

ToF distance sensor (Time of flight) with a range of up to 2.5 m. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. DFRobot SEN0430

5-way control panel that easily integrates with the I2C bus, allowing interaction with a microcontroller. With a built-in RGB LED and interrupt system, the device offers visual and instant notifications of button presses, and the ability to set configurable I2C addresses allows for easy connection of multiple panels in one project. SparkFun PRT-26851

Integrated capacitive fingerprint sensor communicating with the external system via the UART interface. The module has a circular sensor field and takes a fingerprint image with a resolution of 160 x 160 pixels (508dpi). Waveshare UART Fingerprint Sensor (D)