Reverse voltage protection module operating in the 4–75 V range and up to 8 A, based on a low-resistance MOSFET with Rds(on) below 15 mΩ. It does not block reverse current. Designed for power supply systems, including battery-powered applications. Pololu 5358.

A set of adapters dedicated to the universal TL866II Plus programmer. They enable memory support in TSOP32, TSOP40 and TSOP48 package

A switching converter that regulates 24V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5588

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036

Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 5.5x1.7 mm DC plug

Module with 3.5 mm TRS connector for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect the sensors with the development board via the Arduino shield. SparkFun DEV-18386

Module with a 64 MP camera designed for Raspberry Pi minicomputers. Equipped with autofocus and 10x digital zoom. ArduCAM B0399

The power module is designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18427

Module with DC motor driver DRV8256E. It can work with motors supplied with the voltage from 4.5 to 48 V and the current consumption up to 1.9 A. Pololu 4038

BME688, 4-in-1 air quality sensors, gas, humidity, pressure and temperature sensor, LGA-8

A switching converter that regulates 12V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5585

Module with the driver of the resistive touch panel. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5423

Module with ToF VL53L4CX sensor with a range of up to 6 m. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5425