

The power module is designed for the MyoWare 2.0 muscle tension sensor. It is equipped with a LiPo battery with a capacity of 40 mAh and a charging circuit with a USB type C connector. On the board there are LED indicators indicating the charging process. The module connects to other boards from the MyoWare 2.0 series using snap pins. Power Shield allows you to build portable devices that measure the tension of human muscles.
The MyoWare 2.0 system allows you to build devices for the medical analysis of muscle tension, as well as controllers used in the areas of robotics and video games. Modules are prototypical elements and therefore are not intended for diagnosis or treatment. Full documentation and numerous examples of use are available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun CAB-19244
Module with 3.5 mm TRS connector for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect the sensors with the development board via the Arduino shield. SparkFun DEV-18386
Module with 3.5 mm TRS connector for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect the sensors with the development board via the Arduino shield. SparkFun DEV-18425
Arduino Shield with connectors for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect sensors with the development board. SparkFun DEV-18426
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.4 A and features reverse voltage protection.
No product available!
DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V, 380 V or 18 V
Step-Up/Step-Down DC-DC converter module. It has an input voltage of 2.8 to 22 V, an output voltage of 12 V and a maximum output of 2.5 A to 3.5 A. Pololu 4985
No product available!
No product available!
The Step-Up converter module converts the voltage in the range of 10-60V to 12-90V with an efficiency of 97% and operates in the temperature range of -20°C to 65°C. The maximum current is 40A at the input and 22A at the output, with a weight of 400g.
No product available!
A handy way to power 12V powered devices with a center-positive 2.1mm DC barrel jack from a USB port. Adafruit 2778
The Step-Down D24V3F3 Buck Voltage Regulator module gives the output voltage of 3,3V with a wide input voltage range of 4.3-42V and a maximum output current of 300 mA. Pololu 2097
The S9V11F3S5C3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has fixed 3.3 V low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
The Step-Down D24V3AHV Buck Voltage Regulator module with adjustable output voltage in the range of 4-25V with a wide input voltage range of 4.5-42V and a maximum output current of 300 mA. Pololu 2102
DC-DC Step-Up/Step-Down Converter Module. It has an input voltage of 1.4 to 16 V, an output voltage of 9 V and a maximum output current to 1 A. Pololu 4968
DC-DC Step-up converter module based on the U3V70F5 system. Input voltage 2.9 ... 5V, output voltage 5V, maximum current 10A. Two mounting holes. Polol 2891
BMS protection circuit designed for 6 Li-Ion cells. It has a charging function with balancer option, a discharging function and an over-discharge protection function. HXYP-C47-MA18-6S
The Step-Up NCP1402 Buck Voltage Regulator module with output voltage 3.3V, input voltage range of 0.8-3.3V and a maximum output current of 200 mA. Pololu 2114
Step-Down converter D36V50F6 with an output voltage of 6 V, an input voltage from 6.5 to 50 V and a maximum output current of 8 A. Pololu 4092
No product available!
Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 500 mA) connected to the USB socket. There is a diode on the board indicating the power connection
No product available!
The power module is designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18427