60W Adjustable DC-DC Buck Converter - DC-DC Step-Down Converter 5V 18A
ID: 1185016
5906623407576
zł46.64
Tax included
zł37.92 tax excl.
Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip. DFRobot DFR1025
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip or any other device requiring low voltage and high current consumption. In addition, the converter has built-in protection features such as short-circuit protection, overcurrent protection and overheating protection to ensure stable operation. Full documentation is available on the product page.
Features
- Input voltage: 9 V to 15 V
- Output voltage: 1.8 V to 5.1 V
- Output current: 18 A
- Output power: 60 W
- Passive power dissipation
- Conversion efficiency: 92%
- Dimensions: 52 x 37 mm
Kit contains
- Module 60W Adjustable DC-DC Buck Converter
- 2 x 2-pin screw connector
- Aluminium heat sink
1185016
Data sheet
- Output voltage
- 1,8 V - 5,1 V
- Output current
- 18 A
- Converter type
- Step-down
- Supply voltage min
- 9 V
- Supply voltages max
- 15 V
You might also like
RGB LED strip WS2812B with a length of 5m 60LED / m
zł118.23
24h
Available quantity: 24
Available
Gravity module with a colored RGB WS2812 LED. Thanks to the controller built into the diode, you can connect the modules in series and control all with one microcontroller port. DFRobot DFR0605
zł8.88
24h
Available quantity: 8
Available
Matrix with 25 WS2812B RGB diodes controlled by a serial signal. The module can be powered by 5V, only one signal line is required for control
zł3.48
24h
Available quantity: 5
Available
Other products in the same category (16)
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.4 A and features reverse voltage protection.
zł61.12
6 weeks
No product available!
Step-Down converter D36V50F12 with an output voltage of 12 V, an input voltage from 13.3 to 50 V and a maximum output current of 6.5 A. Pololu 4095
zł127.06
24h
Available quantity: 3
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.
zł53.14
24h
Available quantity: 3
Available
Available
The Step-Down converter module on the MP1584EN chip converts the 4.5-28V input voltage to 12V output voltage with a maximum current of 3A and an efficiency of up to 92%. It is a compact device measuring 22 x 17 x 4 mm, operating in a temperature range of -20°C to 85°C, ideal for a variety of industrial applications.
zł3.90
Delivery date unknown
No product available!
Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 36 V with a wide input voltage range from 4 to 38 V and a maximum output current of 5 A
zł9.59
24h
Available quantity: 176
Available
Step-Down DC-DC converter module based on the D36V6F12 system. Input voltage 12.2.50V, output voltage 12V (max. 600mA). Pololu 3796
zł34.82
24h
Available quantity: 4
Available
Step-Down converter D36V50F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 9.5 A. Pololu 4090
zł104.54
24h
Available quantity: 2
Available
Step-Down converter D36V50F7 with an output voltage of 7.5 V, an input voltage from 8.3 to 50 V and a maximum output current of 7 A. Pololu 4093
zł119.63
24h
Available quantity: 2
Available
DC-DC Step-Down Converter ME3116AM6G with an output voltage of 5 V, input voltage from 6 to 24 V and a maximum output current of 1 A. Dedicated to the M5Stack modules. M5Stack U125
zł20.90
24h
Available quantity: 1
Available
No product available!
Step-Down DC-DC converter module based on the D24V150F9 chip. Input voltage 11 ... 40V, output voltage 9V (max 15A). Pololu 2884
zł518.08
24h
Available quantity: 2
Available
The Step-Down converter module on the MP1584EN chip converts the input voltage 9-35V to output voltage 5V with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm
zł3.90
Delivery date unknown
No product available!
The Step-Down converter module converts the input voltage of 14 - 26 V to a constant 12 V, with a maximum output current of 3 A, recommended up to 0.8 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.40
24h
Available quantity: 15
Available
Przetwornica DC-DC Step Down (MP1584), Uwe 4.5..28V, Uwy regulowane 0.8..20V, RoHS
zł5.03
24h
Available quantity: 246
Available
The Step-Down converter module on the MP1584EN chip converts the input voltage (9-35V) to the regulated output voltage (0.8-25V) with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm.
zł3.90
Delivery date unknown
No product available!
Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip. DFRobot DFR1025