LT1083CP 1.25-48V 10A high-power stabilized power supply module

Step-Down DC-DC converter module based on the D24V150F7 chip. Input voltage 9..40V, output voltage 7.5V (max 15A). Pololu 2883

The Step-Down converter module converts the input voltage of 11 - 26 V to a constant 9 V, with a maximum output current of 3 A, recommended up to 1.1 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm

Step-Up/Step-Down DC-DC converter module. It has an input voltage of 2.8 to 22 V, an output voltage of 7.5 V and a maximum output of 2.5 A to 3.5 A. Pololu 4982

The DC-DC Step-down Converter Module with the LM2596S chip allows you to convert the voltage from the range of 3-40 V to a regulated output voltage of 1.5-35 V with high efficiency up to 92%. The maximum output current is 3 A, and the operating frequency is 150 kHz. The compact design with dimensions of 43 × 21 × 14 mm, the possibility of precise voltage regulation and a pinout of 2.54 mm facilitate the integration of the module in DIY projects, power supply systems, modeling and laboratory stations. The operating temperature range is from -40 to 85°C

This powerful boost regulator efficiently boosts input voltages as low as 2.9 V to a higher, adjustable output voltage between 9 V and 30 V while allowing an input current as high as 5 A.

The high-voltage converter module enables voltage conversion in the range of 12-30V with an output power of up to 360W and generates sparks up to 5 cm long. The device operates in the frequency range of 30Hz-50KHz and has compact dimensions of 75 x 70.6 x 14 mm.

Step-Down converter with adjustable output voltage from 1.25 to 36 V, input voltage from 4 to 38 V and maximum current up to 5 A

DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897

Step-Up/Step-Down converter with an output voltage of 3.3 V, an input voltage of 2.5 to 15 V and a maximum current of 600 mA. DFRobot DFR0568

The S9V11F3S5C3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has fixed 3.3 V low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.

The S9V11F5 switching step-up/step-down regulator efficiently produces 5V from input voltages between 2V and 16V. Pololu 2836

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V, 380 V or 18 V

MT3608 is a compact, efficient step-up voltage converter in a SOT23-6 package, offered in a set of 5 pieces. It allows input voltage conversion from 2 V to 24 V into an output voltage of up to 28 V, with a maximum output current of 2 A.

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 15V. PDC004

Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4875