Adapter for MQ gas sensor with potentiometer for analog signal calibration. MOD 72

3.0 m long cable that enables data transmission in the USB 2.0 standard and powering various devices. It has a USB A socket and plug, often used as a USB extension cable. Akyga AK-USB-19

VmodTFT - Color LCD Touchscreen

Crowtail – Collision Sensor 2.0 is a mechanical collision sensor with a digital output, detecting impacts through pressure on a microswitch. Used in mobile robotics for detecting contact with obstacles.

The 7-inch HMI module based on the Raspberry Pi 5, with 4 GB RAM, 32 GB SD card and M.2 SSD slot, offers versatility in IoT and industrial automation applications. Equipped with a Broadcom BCM2712 processor (Cortex-A76, 2.4GHz), dual-band Wi-Fi, Bluetooth 5.0, dual 4Kp60 HDMI output, RS232/RS485, and a 1024x600 touchscreen, it provides performance, reliability and precise operation in harsh environments. Edatec ED-HMI3020-070C-04320

Crowtail – Digital Temperature Sensor 2.0 is a precise TMP102 digital sensor with an I2C interface, operating in the range of –40°C to +125°C. Intended for use in temperature-measurement systems in automation, consumer electronics, and environmental monitoring.

The Step-Up converter module converts the voltage in the range of 3.5-30V to 4-30V with an efficiency of over 90% and a maximum power of 80W. Its compact dimensions (3.8 x 5.2 x 2cm) and wide operating temperature range (-40 - 85°C) make it ideal for many applications.

Audio amplifier with three output channels. It can be powered with the voltage from 5 to 26 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication. XY-S100L

ADXL313WACPZ-RL, 3-Axis Digital Accelerometer ±0.5 g/±1 g/±2 g/±4 g, LFCSP-32

Flexible LED (LED filament) in white (warm), length 300 mm

Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019

IC socket in DIP40 package, 40-pin, 2.54 mm pitch, 15.24 mm pitch, RoHS

Card with RFID tag for systems operating at 125 KHz. Provides the ability to read and write the ID number

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5273

Kynar type cable with a diameter of 0.25 mm (30 AWG) and a length of 180 m. Used for connections in electronic devices, e.g. on PCB

Ultra-low-power ARM Cortex-M3 MCU with 384 Kbytes Flash, 48Kbytes RAM, 32 MHz CPU, LCD, USB, 3xOp-amp, LQFP64, STM, RoHS

The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano

Crowtail – BMP280 Barometer Sensor 2.0 is a compact digital sensor for measuring temperature, atmospheric pressure, and altitude, using the I2C interface. Intended for use in weather projects, mobile environmental systems, and consumer electronics.