KAmod Motor Driver is an advanced DC motor controller powered by 6-30 V, enabling power regulation using the PWM method and control of the direction of rotation, compatible with analog and PWM signals from various sources, equipped with overload and thermal protections and soft start and stop functions

Pin strip straight in black, double-breasted, female, 2x14, pitch 2.54mm, THT, RoHS. PBD28S. Set of 10 pcs

LD1117DT33CTR, low drop voltage regulator 3,3 V, TO-252

STM32F070CBT6 is a 32-bit microcontroller based on the ARM Cortex-M0 core, offering a wide set of peripherals including USB, ADC, and PWM. Ideal for embedded applications, automation, and communication interfaces, in a compact LQFP-48 package.

Positive Voltage Regulator, 5 V, 100mA, TO-92, RoHS

Flex Cable for Raspberry Pi Camera - 200mm / 8"

Pin header goldpin white 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.

A compact stepper motor controller with the TMC2209 system with an operating voltage from 4.75 to 28 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the STEP/DIR interface and is an ideal solution for 3D printers and similar applications. BIGTREETECH TMC2209 V1.3

A set of 40 pcs of male-male connecting cables in various colors, 10 cm long

KAmod ProtoSupply is a universal, USB-C powered breadboard power supply module that offers two independent voltage outputs – the first adjustable (from 2.5 to 10.5 V or fixed at 3.3 V, 5 V, 9 V) and the second with 5 V or 12.5 V options – equipped with overload, overheat and short circuit protections and adapted to standard power rail layouts

4-wire cable, 10 cm long, with a JST SH-1.0 female plug at both ends

Module with adjustable voltage regulator LM317 with an output voltage in the range from 1.2 V to 37 V and a maximum current of 1.5 A

Momentary button with a diameter of 16 mm and a height of 25 mm. Black colour

nRF24L01+Module - 2.4GHz TX/RX Radio Module

The official HDMI cable - mini HDMI to Raspberry Pi with a length of 1 meter in white.

TTL - RS485 converter 3,3V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.

N-Channel Logic Level Enhancement Mode Field Effect Transistor, SOT23, Fairchild Semiconductor, RoHS

Goldpin black 1x40 pins. angular for printing, 2mm grid, gold-plated contacts

KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q