Module with adjustable voltage regulator LM317 1.2-37V 1.5A

The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and a USB type A output. It enables powering devices with 15 V or 20 V and testing chargers. PDC005

BMS module for two 7.4V lithium cells. Charging, discharging and over-discharge protection. The cells can be charged with a continuous current of up to 20 A

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.

Pololu 2833

An efficient step-down converter that steps down the input voltage from as low as 45 V to a regulated output voltage range of 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.4 A. It has built-in reverse polarity, overload and short circuit protection, and the spread spectrum function reduces EMI interference. Pololu 4873

Voltage converter module with a symmetrical output of ± 15 V with a maximum power of 150 W. Used, among others, to power audio amplifiers

The USB Step-Up converter module in the housing allows you to adjust the voltage in the range of 3.5-15V to 0.5-30V, with a maximum current of 2A and a power of 15W. The device is characterized by high precision, voltage resolution 0.01V, current resolution 0.001A, voltage accuracy 0.3% and current accuracy 0.5%, and can operate in temperatures from -40°C to 85°C.

Step-Up converter U3V70F6 with an output voltage of 6 V, an input voltage from 2.9 to 6 V and a maximum output current of 10 A. Pololu 2892

The Step-Down converter module on the MP1584EN chip converts the input voltage (9-35V) to the regulated output voltage (0.8-25V) with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm.

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 5 V and a maximum input of up to 2 A. Pololu 4941

DC-DC Step-up converter module based on the U3V70F12 system. Input voltage 2.9-12V, output voltage 12V, maximum current 10A. Two mounting holes. Pololu 2895

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 9V. PDC004

Power module based on a DC-DC Step-Down converter with a current efficiency of up to 20 A. The output voltage is adjustable in the range from 0 V to 50 V. The power supply offers power up to 1000 W. WZ5020L

BMS system for three Li-Ion cells with a voltage of 12 V. It has the function of charging with balancer, discharging and over-discharge protection. The cells can be charged with continuous current up to 60 A and discharged with current up to 80 A