Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-1000-B

DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897

Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 60° and an autofocus function. ArduCAM B0292

Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a 60° angle of view, autofocus and a 30 cm extension cable. ArduCAM B0321

COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °

Gravity module designed based on the GP8503 system. It is a two-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with 12-bit resolution and 0.1% accuracy. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1034

Set with IMX477 12MP camera, USB cable, lens and tripod. Compatible with UVC, works with Raspberry Pi, Android devices and PC. ArduCAM B0280

Gravity module designed based on the GP8512 system. It is a single-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.01%. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1035

DC-DC Step-Down converter module. It has an input voltage from 12 to 45 V, an output voltage of 12 V and a maximum output current of up to 2.8 A. Pololu 4896

Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. It communicates via the I2C interface. DFRobot SEN0405

COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 500 mA, offering a wide beam angle of 120 °

COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 600 mA, offering a wide beam angle of 120 °

Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810

Module with 16-bit AD5693R DAC converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 5811

Camera with IMX477 sensor with a resolution of 12.3 MPx designed for minicomputers Raspberry Pi. Equipped with focus controlled by the I2C interface. ArduCAM B0272

The Step-Down panel-mounted converter module enables precise regulation of input voltage (6V-70V) and output current (0-5A), with a maximum output power of 300W, conversion efficiency up to 95%, and short-circuit and anti-reverse connection protection. The device, with dimensions of 120mm x 64mm x 72mm, is equipped with continuous regulation functions, with a resolution of 0.01V for voltage and 0.001A for current, and operates in a temperature range of -10 to +75 degrees Celsius.

Module with the PAM8904 controller designed specifically to control piezoelectric elements. The amplifier operates over a wide frequency range, up to 300 kHz, and allows for gain up to approximately 13 Vpp. Adafruit 5791

5 mm orange LED. 1000 pieces in the package

A glass fuse with dimensions of 5x20mm and a current of 10A is a fast-reacting protection of electronic devices against overload, supplied in a set of 100 pieces

LCD1602 I2C Module Waveshare 30495 (gray) with a two-line 16×2 character display, adjustable backlight, and I2C interface offers a cost-effective and GPIO-saving solution for presenting text information in microcontroller projects. Compatibility with popular platforms and low power consumption make it a versatile component for HMI systems, measurement devices, and automation.