M12 mount lens included with adapter. 8 mm focal length and 50° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN024

Set of 100 pieces of shielded RJ-45 category 5E network plugs from Lanberg, designed for LAN FTP cables with a hole diameter of 1.00 ± 0.07 mm, compatible with both wire and stranded, ideal for use with the NT-00204 crimper. Lanberg PLS-5000EZ

Module with a precise clock RTC DS3231 dedicated to the Raspberry Pi Pico. Communication via the I2C interface. SB Components 21420

8-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21871

The Step-Down panel-mounted converter module enables precise regulation of input voltage (6V-70V) and output current (0-5A), with a maximum output power of 300W, conversion efficiency up to 95%, and short-circuit and anti-reverse connection protection. The device, with dimensions of 120mm x 64mm x 72mm, is equipped with continuous regulation functions, with a resolution of 0.01V for voltage and 0.001A for current, and operates in a temperature range of -10 to +75 degrees Celsius.

The USR-W660 converter converts a serial signal into a fast and stable Wi-Fi 6 connection, supporting IEEE 802.11a/b/g/n/ac/ax standards and 2.4 GHz and 5 GHz bands. Equipped with an RS232/RS485 interface, it offers advanced management functions, remote configuration and high security with WPA/WPA2/WPA3 protocols, ideal for industrial and automation applications.

A set of ferrules terminals. The box contains 840 connectors in three colors: red, green and yellow. Connectors are designed for wires from 10 to 20 AWG.

The USR-IO4040 is an I/O expansion module designed specifically for use with the USR-M100/M300 modules. This module allows for the expansion of your system with additional digital ports, providing even greater flexibility in managing and controlling devices in industrial applications. With its robust construction and ease of integration, the USR-IO4040 is an excellent complement to the USR-M100/M300 gateway, enhancing its monitoring and control capabilities. USR-IO4040 

Comprehensive oscilloscope cable kit, allowing precise automotive measurements, requiring a BNC-to-banana adapter for full oscilloscope compatibility. Hantek HT301

LCD 2x16, 85x30mm, LED backlight (yellow-green), enhanced temperature range, fast

QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315

LCD graphic display with 128 x 64 resolution, black content, white backlight, based on RA8808 controller.

LCD 2x20, 116x37mm, no backlight, 9.5mm max, enhanced temperature range, fast (HY-2002A-401-R)

Quartz low resonator (HC49S), frequency 14,745MHz, RoHS

IPS 4" LCD display with touch screen. Equipped with HDMI interface for image display and USB type C and I2C for touch screen. Resolution 720x720 pixels. Waveshare 4inch HDMI LCD (C)

The USB Step-Up converter module converts 3.5-12V input voltage to 4-24V output, offering different power values depending on the voltage level. Equipped with a 3-bit digital display, it has a compact size of 80 x 20 x 14mm.

The high-voltage converter module enables voltage conversion in the range of 12-30V with an output power of up to 360W and generates sparks up to 5 cm long. The device operates in the frequency range of 30Hz-50KHz and has compact dimensions of 75 x 70.6 x 14 mm.

Wide angle lens with CS-Mount. Focal length 6 mm, FoV 65°, manual focus. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN029

The Step-Up converter module converts the voltage in the range of 3.5-30V to 4-30V with an efficiency of over 90% and a maximum power of 80W. Its compact dimensions (3.8 x 5.2 x 2cm) and wide operating temperature range (-40 - 85°C) make it ideal for many applications.

Lanberg Cat.5e 30m patch cord provides a stable and fast connection, ideal for a variety of network applications. Lanberg PCU5-10CC-3000-S