The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the I2C interface. Pimoroni PIM374

Module with a color LCD TFT display with a diagonal of 0.96" and a resolution of 160x80 pixels. It uses the ST7735 controller and communicates via the SPI interface. DFRobot DFR0847

7" TFT LCD display with touch screen and 5 MP camera. It is equipped with DSI interface for image display and I2C interface for touch screen. Resolution 800x480 pixels. Waveshare 7inch DSI LCD (with cam)

10.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Has a resolution of 2560x1600 pixels. US Plug. Waveshare 10.5inch HDMI AMOLED

Set (5 pieces) of wires for attaching modeling servos with the Grove system. With one wire you can connect 2 servos to one Grove slot. Seeed studio 110990057

Pololu G2 18v15 High Power is a miniature DC motor controller. Power supply for the controller: 6.5 ... 30 V. Current efficiency of the module: 15 A. The module has protection against back voltage and overvoltages. Pololu 1362

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).

Module with 1 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4241

Wireless keyboard with Bluetooth communication Equipped with simultaneous pairing function with 4 devices. BLOW BK104

Module with 8 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4448

DC motor driver that allows you to control the movement of three drives using the I2C interface. Connectors for self-assembly. Pololu 5034

DC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5033

Module with a round 1.28" IPS LCD display with a resolution of 240x240 px. It communicates via the SPI interface. ModRouDisp1.28"

Cable (adapter) STEMMA QT/Qwiic for Arduino MKR (ESLOV) 100 mm long. It enables interoperability between systems based on I2C SparkFun Qwiic and Adafruit STEMMA QT and Arduino MKR boards. Adafruit 4483

Zynq-7000 All Programmable SoC, Dual ARM Cortex-A9 MPCore, Artix-7 FPGA, 28K Logic Cells, 667MHz CSPBGA400, Xilinx

Satellite board can be used for easy integration into customer devices and basic gesture detection applications.Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply

DFRobot BLE4.1 Module is a Bluetooth 4.1 module with DA14681 processor with 3.3 V power supply. It is characterized by low energy consumption and advanced energy management system (built-in charging module). DFRobot TEL0120

The GPS receiver is equipped with a GP-735T module. It is supplied with the voltage from 3.3 to 5.5 V and communicates via the UART interface. SparkFun GPS-13670

Expansion board based on the Wiznet W5200 Ethernet chip. It allows you to easily connect the Arduino to the Ethernet network. DFRobot DFR0272

Pololu G2 18v15 High Power is a miniature DC motor controller. Power supply for the controller: 6.5 ... 30 V. Current efficiency of the module: 15 A. The module has protection against back voltage and overvoltages. Pololu 1363