A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-200mm

Camera with a resolution of 5 MPx with a USB interface. Equipped with a CMOS OV5648 sensor with a wide-angle lens with a viewing angle of 110°. ArduCAM B0454

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5263

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-1500-W

3-pin plug straight for PCBs, 2.54mm pitch, tinned, white color. Set of 10 pieces

Set with camera and wide angle lens. The set is designed to work with the NVIDIA Jetson Nano computer. ArduCAM B0249

Pololu Carrier with Sharp GP2Y0D810Z0F Digital Distance Sensor 10cm

LM35 analog temperature sensor module. It allows you to measure the temperature in the range from 0°C to 100°C with a resolution of 0.5°C

Flexible LED (LED filament) in green, length 130 mm

ARM Cortex-M3 CPU, Low power, 384kB Flash, 48kB RAM, USB, UART, I2C, SPI, ADC, DAC, STM, LQFP100, RoHS

Gravity: Digital Crash sensor is a microswitch module (right) often called a limit switch. The module is powered by 5V voltage and has a digital two-state output. DFRobot SEN0138-R

IR distance sensor with a range of up to 400 cm. It has a digital output that changes its state when the sensor detects an object. DFRobot SEN0531

6p male plug angled for PCBs, 2.54mm, tinned, white. Set of 10 pieces

4-channel converter of logic levels allowing for connection of systems operating with voltage levels of 1.8 V, 2.5 V, 3.3 V and 5 V. DFRobot DFR0843

LCD graphic display 122x32 pixels, 80x36mm, AMBER Blackline LED backlight, extended temperature range, controller: NJU6450A

Module with an active buzzer. The board is equipped with an XH2.54 connector and is controlled by a digital signal

The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387

MEMS microphone module that will allow voice detection, sound recording or audio transmission. It communicates via an I2S interface. DFRobot SEN0526

10-pin WF10S plug straight 2.54 thick, tin-plated. Set of 10 pieces