ARK terminal connector spring 12-pin, pitch 3.5 mm, non-detachable. Set of 5 pieces

Module dedicated to Raspberry Pi, which supports various wireless communication modes, such as LTE-TDD, LTE-FDD, GSM, GPRS and EDGE. With download speeds of up to 10Mbps and upload speeds of up to 5Mbps, this module is perfect for IoT applications such as remote information processing, device monitoring, POS terminals, industrial routers, remote diagnostics and satellite positioning. Waveshare A7670E Cat-1/GNSS HAT

LED 3 mm IR 940 [nm], angle 25 degrees; power max 100 mW typ. (50mA) (1.5V), RoHS

The 4120 automotive relay socket is a 5-pin connector with 18 cm long wires and a built-in rectifier diode that protects the control system from overvoltages, increasing the reliability of the vehicle\'s electrical system

A long-range RF sub-GHz wireless transceiver module capable of operating in the 433 MHz frequency band. The integrated architecture allows the use of a minimum number of external components with maximum design flexibility. RFM69HW433

Adapter for the 6-pin JST SH connector (vertical) with a pitch of 1 mm to the DIP holes, pitch of 2.54 mm. Pololu 4770

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0500-BK

KE10/16, electrolytic capacitor 10uF 16V SMD type A

8-bit ST7 MCU, 1.5kB Flash, 128B RAM, LT Timer w/ Wdg, AT Timer w/ 1 PWM, SPI, DIP16, RoHS

Conductive ITO coated glass. It has dimensions of 300x300 mm, a thickness of 1.8 mm and a resistance of 15 Ω/inch2

Finder 7F.02.0.000.1000 is a standard exhaust filter with dimensions of 92 x 92 mm, designed for installation in electrical cabinets to ensure proper ventilation and protection against dust and moisture. Made from self-extinguishing plastic, it complies with the IP54 standard, ensuring resistance to dust and water splashes.

RTC DS1302 real time clock module with CR2032 battery holder and solder pins

Finder 99.01.0.024.59 is an LED module with a green diode, designed to work with sockets from series 90, 92, 94, 95, 96, and 97, providing visual indication of the relay status. This module is compatible with supply voltages from 6 to 24 V AC/DC, making it a versatile solution for various industrial applications.

Male terminal block, angled, 8-pin. Pitch 3.81mm. Height 7mm. 15EDGRC. Set of 10 pieces

The GY-86 module is a module with sensors MPU6050, HMC5883L and MS5611, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3V voltage stabilizer. modGY-86

TSL12122, Tact Switch 12x12 with LED, TACT 12x12

Male terminal block, angled, 2-pin. Pitch 3.81mm. Height 7mm. 15EDGRC. Set of 10 pieces

Wide-angle lens with M12 mount included with the adapter. Focal length 3.56 mm and FoV 90°. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN033

TSL12122, Tact Switch 12x12 with LED, TACT 12x12

Adapter for power supply with 5.5 x 2.1 mm input and 4.0 x 1.7 mm output