KAmodMMA8653FC is a module with NXP's MMA8653FC three-axis accelerometer. The sensor allows the measurement of acceleration in the range of ± 2g / ± 4g / ± 8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor takes place via the I2C interface

Popular 2.1 / 5.5 mm power connector for threaded mounting.

The RP2350A is a high-performance microcontroller with two Cortex-M33 or Hazard3 cores, 520 KB of SRAM, and support for up to 16 MB of external flash/PSRAM via a QSPI interface. It offers a wide range of peripherals, including USB 1.1, 24 PWM channels, 12 PIO machines, and advanced security features, making it ideal for embedded and IoT applications

The dynamic NFC / RFID tag with I2C bus and ISO 15693 RF interface in the SOIC8 housing has a built-in 64k EEPROM memory. Producer: STMicroelectronics

KAmodM41T82 is a module with the STMicroelectronics M41T82 RTC clock. The chip allows precise timing, and an additional battery connector allows you to maintain the power supply when the main power is turned off. Communication with the module is realized via I2C bus.

Connector for connecting a 50-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-50PF

Molex 39-01-2040 Mini-Fit Jr. Series Connector designed for applications requiring compact and reliable electrical connections in low-voltage systems. Provides wire-to-wire or PCB-to-board connections in a 2x2 4.2 mm pitch configuration. Ideal for industrial, consumer electronics and automotive applications. Wire-mount female plug compatible with Molex contact system, featuring a latching mechanism to prevent accidental disconnection

KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635

Connector for connecting a 30-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-30PF

ZIF connector FFC/FPC 16-pin, 0.5 mm pitch, bottom contact, designed for horizontal PCB mounting. Ideal for connecting signal ribbons in compact electronic circuits.

10-wire IDC - BLT female-female connecting cable

Extruded aluminium heatsink dedicated to SoM produced by SoMLabs with optional bracket and fan. The maximum thermal resistance is 18.9K/W and maximum dissipation loss 3.9W

The CAN interface module KAmod with the SN65HVD230 chip enables direct communication with the CAN bus in systems powered by 3.3 V. Compatible with PCA82C250 chips, equipped with ESD protection and functions eliminating interference, it will perform well in industrial, automotive, and IoT projects.

Connector for connecting a 40-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-40PF

Slim D-sub Connector, 9-pin Right Angle with Maximum 2.5A Current Rating, RoHS

The GL5537 Photoresistor is a high power, high-speed photosensitive element that changes its height based on scattered light, covering applications in a variety of applications such as automatic flashing, control, and photoelectric systems, with an ultimate flux of 150 VDC, a dissipation power of 100 mW, and an operating temperature range of -30°C to +70°C.

The KAmodPCAL6408 is an 8-bit I/O expander with the PCAL6408A chip by NXP, controlled by the I2C interface.

Female connector MOLEX 90142-0020 from the C-Grid III series, featuring 20 contact positions in a 2x10 layout with a 2.54 mm pitch, is designed for wire-to-board connection systems. The product is supplied without contacts, allowing for individual component selection to meet application requirements. It is used in electronic projects, industrial devices, and automation systems.

Small Signal Diode, SOD80, Fairchild Semiconductor, RoHS