modRFID-NFC-PN532 - non-contact identification module RFID / NFC
ID: 564011
5906623455966
zł29.93
Tax included
zł24.33 tax excl.
The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3
Description
The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring.
properties
- RFID / NFC reader module
- It works based on the PN532 system
- Range: 5-7 cm
- Supported standards:
- Mifare 1k, 4k, Ultralight, DesFire cards
- ISO / IEC 14443-4 cards like CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001
- FeliCa cards such as RCS_860 and CS_854
- Available buses: SPI, I2C or UART
- Derived IRQ, RSTO signals
- Built-in translator of logic levels, 5V TTL for I2C and UART, 3.3V TTL for SPI
- Selecting the bus type using built-in dip-switches
- RFID support (write / read), P2P communication, NFC communication with Android phones
- Two mounting holes with a diameter of 3 mm
- Dimensions: 42.7 x 40.4 x 4 mm
Included
- RFID / NFC card reader module
- RFID card
- RFID keyring
- Angled goldpin connector for soldering
- Connection cable, female-female, four-wire
564011
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Adafruit 789 - Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
zł235.56
24h
Available quantity: 1
Available
Available
The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader. Adafruit 360
zł12.94
24h
Available quantity: 5
Available
RFID identification key with dimensions of 40.5 mm x 32 mm x 4.2 mm, operating on the 13.56 MHz frequency. RFID Tag Key
zł1.50
Delivery date unknown
No product available!
RFID card with dimensions 54 mm x 85.5 mm x 0.87 mm, working on the 13.56 MHz frequency. RFID Tag Card
zł1.37
24h
Available quantity: 47
Available
Other products in the same category (16)
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
zł19.91
24h
Available quantity: 4
Available
A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006
zł97.67
24h
Available quantity: 5
Available
Intelligent RFID identifier cooperating with iNode Control Point
zł101.84
24h
Available quantity: 1
Available
A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035
zł14.34
24h
Available quantity: 2
Available
Demo kit for prototyping applications and devices based on NFC ST25DV64KC tags. STMicroelectronics ST25DV64KC-DISCO
zł377.81
24h
Available quantity: 4
Available
NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer
zł117.01
24h
Available quantity: 1
Available
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Regular pricezł149.00zł129.00
24h
Available quantity: 1
Available
The dynamic NFC / RFID tag with I2C bus and ISO 15693 RF interface in the SOIC8 housing has a built-in 64k EEPROM memory. Producer: STMicroelectronics
Regular pricezł6.69zł5.44
24h
Available quantity: 466
Available
A small key ring with an RFID tag for systems operating at 125 KHz. Provides the ability to read and write a unique ID number
zł2.79
24h
Available quantity: 2
Available
M5Stack U107 is an evaluation board with an RF transceiver operating in the 840 MHz - 960 MHz band, designed for wireless communication in IoT systems. Thanks to its wide frequency range, this module is suitable for applications such as smart cities, remote measurements and security systems
zł423.27
24h
Available quantity: 1
Available
Available
The 13.56 MHz RFID reader module in a set with a keyring and RFID card
zł9.85
24h
Available quantity: 19
Available
The module for the RFID reader (125 kHz) is equipped with a USB interface. Works with ID-3LA, ID-12LA and ID-20LA series systems. The selected RFID reader is simply plugged into the module\'s connectors. SparkFun SEN-09963
zł132.46
24h
Available quantity: 1
Available
The ID-20LA RFID reader from ID Innovations has an operating frequency of 125 kHz. It has a built-in antenna and pins with 2 mm spacing. Among other things, it is designed to work with the RFID USB Reader module. SparkFun SEN-11828
zł199.00
3 weeks
No product available!
NFC/RFID tag equipped with ST25DV64KC NFC/RFID tag from STMicroelectronics. The chip offers a 64-kbit (8-byte) EEPROM. Complies with ISO/IEC 15693 or NFC Forum Type 5. SparkFun SEN-21274
zł38.51
3 weeks
No product available!
Adapter for RFID reader (125 kHz). Works with ID-3LA, ID-12LA and ID-20LA series systems. SparkFun SEN-13030
zł13.85
24h
Available quantity: 2
Available
The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3