Key ring with RFID tag T5577 125kHz

Intelligent relay cooperating with iNode Control ID

Adapter for RFID reader (125 kHz). Works with ID-3LA, ID-12LA and ID-20LA series systems. SparkFun SEN-13030

NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer

RFID tag for systems operating at 125 KHz. Provides the ability to read and write a unique ID number

A development kit designed for NFC applications. It includes the CLEV6630B board based on the LPC1769 microcontroller, NFC cards and a set of antennas. NXP OM26630FDK

RFID identification key with dimensions of 40.5 mm x 32 mm x 4.2 mm, operating on the 13.56 MHz frequency. RFID Tag Key

The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader. Adafruit 360

A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006

RFID Reader/Transponder IC 13.56MHz ISO 14443 I2C, SPI, UART, -25..85C, VFQFN32, NXP

M5Stack U107 is an evaluation board with an RF transceiver operating in the 840 MHz - 960 MHz band, designed for wireless communication in IoT systems. Thanks to its wide frequency range, this module is suitable for applications such as smart cities, remote measurements and security systems

NFC/RFID tag equipped with ST25DV64KC NFC/RFID tag from STMicroelectronics. The chip offers a 64-kbit (8-byte) EEPROM. Complies with ISO/IEC 15693 or NFC Forum Type 5. SparkFun SEN-21274

The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3

Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003

The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards

UHF RFID module (EPCglobal Gen 2), based on JADAK\'s M7E-HECTO chip, which enables fast reading of up to 300 tags per second and writing in 80 milliseconds, with adjustable output power from 0 dBm to 27 dBm. Equipped with a USB-C connector and CH340C converter, the module enables easy connection to a computer, and thanks to support for power supply via USB-C or 3.3V connector with a pitch of 2.54 mm, it is compatible with both computers and microcontrollers, providing flexible use options. SparkFun WRL-24738

Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701