Reader module evaluation board M5Stack U107 840MHz~960MHz

ID Card 125khz

Demo kit for prototyping applications and devices based on NFC ST25DV64KC tags. STMicroelectronics ST25DV64KC-DISCO

The module for the RFID reader (125 kHz) is equipped with a USB interface. Works with ID-3LA, ID-12LA and ID-20LA series systems. The selected RFID reader is simply plugged into the module\'s connectors. SparkFun SEN-09963

A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006

The dynamic NFC / RFID tag with I2C bus and ISO 15693 RF interface in the SOIC8 housing has a built-in 64k EEPROM memory. Producer: STMicroelectronics

NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer

A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035

Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192

Module with RFID 125 KHz tag reader. It allows reading 125KHz RFID tags / cards (EM4100 standard) from a maximum distance of 7 centimeters. The module has a connector in accordance with the Grove standard. Seeed Studio 113020002

Intelligent relay cooperating with iNode Control ID

The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader. Adafruit 360

UHF RFID module (EPCglobal Gen 2), based on JADAK\'s M7E-HECTO chip, which enables fast reading of up to 300 tags per second and writing in 80 milliseconds, with adjustable output power from 0 dBm to 27 dBm. Equipped with a USB-C connector and CH340C converter, the module enables easy connection to a computer, and thanks to support for power supply via USB-C or 3.3V connector with a pitch of 2.54 mm, it is compatible with both computers and microcontrollers, providing flexible use options. SparkFun WRL-24738

A small key ring with an RFID tag for systems operating at 125 KHz. Provides the ability to read and write a unique ID number

The 13.56 MHz RFID reader module in a set with a keyring and RFID card

The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards

RFID identification key with dimensions of 40.5 mm x 32 mm x 4.2 mm, operating on the 13.56 MHz frequency. RFID Tag Key