NFC card reader with USB interface

Adafruit 364

A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150

A development kit designed for NFC applications. It includes the CLEV6630B board based on the LPC1769 microcontroller, NFC cards and a set of antennas. NXP OM26630FDK

Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701

Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192

Intelligent RFID identifier cooperating with iNode Control Point

Intelligent RFID identifier cooperating with iNode Control Point

The 13.56 MHz RFID reader module in a set with a keyring and RFID card

A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006

The dynamic NFC / RFID tag with I2C bus and ISO 15693 RF interface in the SOIC8 housing has a built-in 64k EEPROM memory. Producer: STMicroelectronics

M5Stack U107 is an evaluation board with an RF transceiver operating in the 840 MHz - 960 MHz band, designed for wireless communication in IoT systems. Thanks to its wide frequency range, this module is suitable for applications such as smart cities, remote measurements and security systems

A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035

RFID tag for systems operating at 125 KHz. Provides the ability to read and write a unique ID number

RFID card with dimensions 54 mm x 85.5 mm x 0.87 mm, working on the 13.56 MHz frequency. RFID Tag Card

Module with RFID reader. It is equipped with a buzzer and communicates via UART or USB interface. SB Components 20669

Module with RFID 125 KHz tag reader. It allows reading 125KHz RFID tags / cards (EM4100 standard) from a maximum distance of 7 centimeters. The module has a connector in accordance with the Grove standard. Seeed Studio 113020002