

A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Adafruit 789 - Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
Module with RFID 125 KHz tag reader. It allows reading 125KHz RFID tags / cards (EM4100 standard) from a maximum distance of 7 centimeters. The module has a connector in accordance with the Grove standard. Seeed Studio 113020002
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
Adapter for RFID reader (125 kHz). Works with ID-3LA, ID-12LA and ID-20LA series systems. SparkFun SEN-13030
NFC module designed for Arduino. Meets the standards of reader mode, P2P mode and card emulation mode. The board has an integrated RF antenna. NXP OM5578/PN7150ARDM
The module for the RFID reader (125 kHz) is equipped with a USB interface. Works with ID-3LA, ID-12LA and ID-20LA series systems. The selected RFID reader is simply plugged into the module\'s connectors. SparkFun SEN-09963
Card with RFID tag for systems operating at 125 KHz. Provides the ability to read and write the ID number
M5Stack U107 is an evaluation board with an RF transceiver operating in the 840 MHz - 960 MHz band, designed for wireless communication in IoT systems. Thanks to its wide frequency range, this module is suitable for applications such as smart cities, remote measurements and security systems
No product available!
Intelligent relay cooperating with iNode Control ID
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
The ID-20LA RFID reader from ID Innovations has an operating frequency of 125 kHz. It has a built-in antenna and pins with 2 mm spacing. Among other things, it is designed to work with the RFID USB Reader module. SparkFun SEN-11828
No product available!
Intelligent RFID identifier cooperating with iNode Control Point
Handheld RFID card reader enabling card duplication. It allows you to read data from one card and write it to the other
Intelligent RFID identifier cooperating with iNode Control Point
NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer. JT308
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035