RFID Tag Card - RFID non-contact identification system card (13.56 MHz)

NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer

Module with RFID 125 KHz tag reader. It allows reading 125KHz RFID tags / cards (EM4100 standard) from a maximum distance of 7 centimeters. The module has a connector in accordance with the Grove standard. Seeed Studio 113020002

NFC module designed for Arduino. Meets the standards of reader mode, P2P mode and card emulation mode. The board has an integrated RF antenna. NXP OM5578/PN7150ARDM

Adafruit 364

The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3

Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701

RFID identification key with dimensions of 40.5 mm x 32 mm x 4.2 mm, operating on the 13.56 MHz frequency. RFID Tag Key

NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer. JT308

Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003

RFID tag for systems operating at 125 KHz. Provides the ability to read and write a unique ID number

The module for the RFID reader (125 kHz) is equipped with a USB interface. Works with ID-3LA, ID-12LA and ID-20LA series systems. The selected RFID reader is simply plugged into the module\'s connectors. SparkFun SEN-09963

KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.

Card with RFID tag for systems operating at 125 KHz. Provides the ability to read and write the ID number

Intelligent RFID identifier cooperating with iNode Control Point

Handheld RFID card reader enabling card duplication. It allows you to read data from one card and write it to the other

UHF RFID module (EPCglobal Gen 2), based on JADAK\'s M7E-HECTO chip, which enables fast reading of up to 300 tags per second and writing in 80 milliseconds, with adjustable output power from 0 dBm to 27 dBm. Equipped with a USB-C connector and CH340C converter, the module enables easy connection to a computer, and thanks to support for power supply via USB-C or 3.3V connector with a pitch of 2.54 mm, it is compatible with both computers and microcontrollers, providing flexible use options. SparkFun WRL-24738