ID-20LA - RFID 125 kHz reader

A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035

RFID card with dimensions 54 mm x 85.5 mm x 0.87 mm, working on the 13.56 MHz frequency. RFID Tag Card

Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291

Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192

FSC-BP108 iBeacon is a durable and energy-efficient Bluetooth 5.1 tag with IP67 protection, supporting popular beacon formats and enabling remote configuration via a mobile app. It is suitable for localization systems, asset tracking, and proximity-based marketing.

M5Stack U107 is an evaluation board with an RF transceiver operating in the 840 MHz - 960 MHz band, designed for wireless communication in IoT systems. Thanks to its wide frequency range, this module is suitable for applications such as smart cities, remote measurements and security systems

Module with RFID 125 KHz tag reader. It allows reading 125KHz RFID tags / cards (EM4100 standard) from a maximum distance of 7 centimeters. The module has a connector in accordance with the Grove standard. Seeed Studio 113020002

WRL-14147

NFC/RFID tag equipped with ST25DV64KC NFC/RFID tag from STMicroelectronics. The chip offers a 64-kbit (8-byte) EEPROM. Complies with ISO/IEC 15693 or NFC Forum Type 5. SparkFun SEN-21274

Intelligent RFID identifier cooperating with iNode Control Point

Card with RFID tag for systems operating at 125 KHz. Provides the ability to read and write the ID number

The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards

Adafruit 789 - Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras

UHF RFID module (EPCglobal Gen 2), based on JADAK\'s M7E-HECTO chip, which enables fast reading of up to 300 tags per second and writing in 80 milliseconds, with adjustable output power from 0 dBm to 27 dBm. Equipped with a USB-C connector and CH340C converter, the module enables easy connection to a computer, and thanks to support for power supply via USB-C or 3.3V connector with a pitch of 2.54 mm, it is compatible with both computers and microcontrollers, providing flexible use options. SparkFun WRL-24738

A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006

Handheld RFID card reader enabling card duplication. It allows you to read data from one card and write it to the other