zł1,462.60 tax excl.
Compact RFID tool designed for the analysis, diagnostics, and security testing of contactless systems operating in the LF and HF bands. Proxmark3 RDV4 supports 125 kHz and 13.56 MHz, uses a SAM7S512 processor, and features integrated, pre-tuned antennas and a SIM/Smart Card reader. Its modular design supports additional antennas and BLE/WiFi expansion modules. Proxmark3 RDV4.01
Proxmark3 RDV4.01 is designed for working with LF 125 kHz and HF 13.56 MHz RFID systems during authorized security testing, contactless system analysis, and research. The hardware uses a SAM7S512 processor and 2 Mbit / 256 kB of external SPI Flash memory. Integrated, pre-tuned antennas allow the device to operate without external antennas in its basic configuration, while the 54 x 87 x 10 mm ABS enclosure facilitates mobile and field use.
The device features a SIM/Smart Card reader, four power LEDs, four mode LEDs, and a single button. Its modular design supports interchangeable medium- and long-range antennas as well as BLE/WiFi expansion modules. Proxmark3 RDV4 can work with software developed for the Proxmark3 platform and can be used for RFID communication analysis, tag diagnostics, and testing contactless identification systems in laboratory and penetration-testing environments.
No product available!
Module with RFID 125 KHz tag reader. It allows reading 125KHz RFID tags / cards (EM4100 standard) from a maximum distance of 7 centimeters. The module has a connector in accordance with the Grove standard. Seeed Studio 113020002
A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035
NFC module designed for Arduino. Meets the standards of reader mode, P2P mode and card emulation mode. The board has an integrated RF antenna. NXP OM5578/PN7150ARDM
A development kit designed for NFC applications. It includes the CLEV6630B board based on the LPC1769 microcontroller, NFC cards and a set of antennas. NXP OM26630FDK
RFID Reader/Transponder IC 13.56MHz ISO 14443 I2C, SPI, UART, -25..85C, VFQFN32, NXP
A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
Handheld RFID card reader enabling card duplication. It allows you to read data from one card and write it to the other
NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer
NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer. JT308
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
Card with RFID tag for systems operating at 125 KHz. Provides the ability to read and write the ID number
Compact RFID tool designed for the analysis, diagnostics, and security testing of contactless systems operating in the LF and HF bands. Proxmark3 RDV4 supports 125 kHz and 13.56 MHz, uses a SAM7S512 processor, and features integrated, pre-tuned antennas and a SIM/Smart Card reader. Its modular design supports additional antennas and BLE/WiFi expansion modules. Proxmark3 RDV4.01