Connector for connecting a 10-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-10PF

8-bit Bidirectional Voltage Converter

Connector for connecting a 40-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-40PF

AMS1117CD-1.8, 1A low drop voltage regulator 1,8 V, TO-252

THT resistor, 0.25W, 5%, RoHS

Connector for connecting a 6-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-06PF

LED 0805 yellow, 100 mcd (20 mA) (2.0 V)

Pin header goldpin blue 2x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.

KAmodLSM303C is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes

The module with the sensor for the measurement of the concentration of carbon monoxide (MQ-7), allows the measurement of the concentration of carbon (CO) in the air. The module has an analogue output and an output triggered by exceeding the threshold of sensitivity.

Pin strip straight in black, double-row, female with 2x13 system, 2.54mm pitch and elongated legs (12mm). Thru-hole mounting strip (THT). PBD26S L

TBG-5-PW-2P/GN is a 2-pin vertical male header for PCBs with a 5.08 mm pitch, featuring an enclosed design that provides protection and connection stability. Compliant with RoHS standards and made from flame-retardant polyamide, it supports currents up to 15 A and voltages up to 300 V, making it ideal for various electronic applications.

Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector

The sensor allows you to measure the temperature and set the threshold for switching / triggering the alarm output, thanks to which it can act as a temperature watchdog. Measurement range from -55 to + 125 degrees Celsius; SO8 housing.

Module with a 4-bit bi-directional voltage level converter. It allows you to connect digital interfaces with different operating voltages. KAmodNTS0104PW

The first microcontroller designed by the Raspberry Pi foundation, equipped with two ARM Cortex M0 + cores clocked at 133 MHz, 264 KB of RAM and 30 ports with I2C, SPI, UART and USB interfaces. External flash memory can be connected via the QSPI interface. The system can be programmed in C / C ++ or microPython. Raspberry Pi SC0908

Connector for connecting a 16-pin ribbon with 0.5 mm pitch to a printed circuit board. F0500WR-S-24PF

Double-sided universal board 30 × 70 mm with 252 metallized holes and gold-plated contact pads. Intended for prototyping circuits with through-hole components in a standard 2.54 mm pitch.

Socket for push-push microSD cards made of metal and plastic from ATTEND

MCP2515-I/SO is a widely used SPI-based CAN controller that enables adding CAN bus support to microcontrollers without a built-in CAN module. It is suitable for embedded and industrial applications, provided that an appropriate external CAN transceiver is used for connection to the bus.