The sensor allows you to measure the temperature and set the threshold for switching / triggering the alarm output, thanks to which it can act as a temperature watchdog. Measurement range from -55 to + 125 degrees Celsius; SO8 housing.

The RP2350B is a dual-core ARM Cortex-M33 and RISC-V Hazard3 (150 MHz) microcontroller with 520 KB SRAM and support for up to 16 MB QSPI flash/PSRAM, equipped with a wide range of peripherals including 48 GPIOs, USB 1.1, PIOs and 24 PWM channels. It offers advanced security features such as SHA-256 accelerator, OTP protection and attack protections, making it ideal for embedded applications

Adapter that allows you to connect the HDMI cable to the Raspberry Pi Zero 2 W

SL-HEATSINK-60x20x10-A is an aluminum heatsink designed for SoM modules manufactured by SoMLabs. It has dimensions of 60 x 20 x 10 mm and is attached with a self-adhesive thermal tape. It is characterized by a maximum thermal resistance of 18.8 K/W and a maximum power loss of up to 4.1 W

Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.

Popular 2.1 / 5.5 mm power connector for threaded mounting.

100 kΩ rotary potentiometer. RM065

Step-Down converter with adjustable or constant output voltage from 0.8 to 17 V, input voltage from 4.5 to 24 V and a maximum current of up to 3 A

2-wire cable, 30 cm long, with a JST PH-2.0 female plug at one end

45 V, 500 mA PNP general-purpose transistors, SOT23, NXP, RoHS

The RS-485 / RS-422 transceiver from Maxim Integrates in the SO8 housing, allows the transmission of a signal with a throughput of up to 2.5Mbit / s, it has the ability to support up to 32 devices on a shared bus

Connector for connecting a 30-pin ribbon with a pitch of 0.5 mm to a printed circuit board. With a FLIP latch

Connector for connecting a 6-pin ribbon with a pitch of 0.5 mm to a printed circuit board. PCA-6-LA-06-HL-3

A-A type flexible cable (tape), 5 cm long. The tape has 16 wires and a 0.5 mm pitch

Pin strip straight in yellow, single-row, female, 1x10, pitch 2.54mm, THT, RoHS. PB10S YELLOW. Set of 10 pieces

SMA female connector designed for PCB mounting. It has an impedance of 50 Ω, dedicated to antennas with a male SMA connector. Smaller thread

KAmodMAG3110FC is a module with magnetic field sensor MAG3110FC from NXP. The sensor measures the magnetic field in the range of ±1000μT, with a resolution of 0.1μT. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMAG3110FC

KAmodMPC17C724 is a module with a double MP bridge bridge type MPC17C724. The system allows you to control two DC brush motors or one bipolar stepping motor. The controller operates at a voltage range of 2.7 - 5.5 V and can work with motors with power consumption up to 0.4 A.

Pin strip straight in yellow, single-row, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S YELLOW. Set of 10 pieces