7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. For Raspberry Pi (B, A+, B+, 2), Banana Pi, Banana Pro, BeagleBone Black

I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. DFRobot DFR0576

Ultrasonic distance sensor MB1020 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 792

15-pin FPC ribbon cable with a length of 15 cm designed for connecting cameras and other peripherals to the CSI connector on Raspberry Pi. ArduCam CB002

3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi, 320×480 resolution. Waveshare 3.5inch RPi LCD (A)

Module with a color IPS LCD display with a diagonal of 1.3". It has a resolution of 240x240 pixels and an ST7789 controller. Communication with the module is realized via the SPI interface. Waveshare 1.3inch LCD Module

Module with addressed RGB diode WS2812B designed for Wemos D1 Mini boards

ModCC2540-A1 allows the use of Bluetooth transmission features BLE 4.0 - thanks to the built-in CC2540 chip, it is possible to create complex projects without the use of an additional microcontroller. modCC2540-A1

Pink LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21

DFR0275

The HTC-2 is a reliable and functional weather station with temperature and humidity measurement, clock, alarm, and memory for min/max values, ideal for home or office use.

MSP430 Low Power MCU, 2kB Flash, 128 B RAM, DIP14, TI, RoHS

An adapter dedicated to XBee modules. It has UART, USB interface and built-in buttons and LEDs. It provides an easy way for project development and debugging. Waveshare XBee USB Adapter

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0750-S

Module with a potentiometer and RGB backlight. It has a limited range of motion and is perfect for e.g. lighting control. Pimoroni PIM523

A module with an electret microphone and an amplifier that will allow you to detect a voice, a clap or a door slam using the analog output

Clock signal generator with a frequency of 8 kHz to 160 MHz based on the SI5351A integrated circuit. Communication with the module takes place via the I2C bus. Adafruit 5640

LM35 analog temperature sensor module. It allows you to measure the temperature in the range from 0°C to 100°C with a resolution of 0.5°C

HMI (Human-Machine Interface) operator panel for visualization and interaction with automation systems. It uses a 7" LCD display with 800x480 pixel resolution with a touch panel. It supports various communication protocols such as RS232 and RS485. Samkoon EA-070B