Module with Flash memory W25Q128 with a capacity of 128 Mbit (16 MB). It communicates via the SPI interface. Adafruit 5643

Module with DC motor driver DRV8876. It can work with motors supplied with the voltage from 4.5 to 37 V and the current consumption up to 1.3 A. Pololu 4036

Module with 3.5 mm TRS connector for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect the sensors with the development board via the Arduino shield. SparkFun DEV-18386

Ethernet MQTT communication module designed for M5Stack sets. It communicates via the UART interface using AT commands. M5Stack U129

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036

TFT color LCD display module with touch panel. It offers a diagonal of 2.8" and a resolution of 240x320 pixels. It has a built-in ILI9341 driver, communicates via an SPI interface and is equipped with a microSD card slot and an EYESPI connector. Adafruit 2090

Articulated rubber duck antenna operating in the 400 - 900 MHz UHF band, SMA male connector, 50 Ω impedance, gain up to 3.5 dBi, intended for RF devices and UHF systems. Seeed Studio 109990205

Module with OV5647 sensor cooperating with ODROID-M1. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. Odroid M1 MIPI-CSI Camera Kit

Module with ToF VL53L4CX sensor with a range of up to 6 m. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5425

Module with the driver of the resistive touch panel. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5423

BME688, 4-in-1 air quality sensors, gas, humidity, pressure and temperature sensor, LGA-8

A 0.66" monochrome OLED display module with 64x48 pixel resolution. It uses the SSD1306 controller and communicates via an I2C or SPI interface. It has a soldered connector. SparkFun LCD-13722

The power module is designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18427

Module with 3.5 mm TRS connector for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect the sensors with the development board via the Arduino shield. SparkFun DEV-18425

The TEC1-12712 Peltier cell is an advanced thermoelectric module, powered by 15.4V and conducting current up to 12A, which allows for effective cooling and heating at large temperature differences. With a cooling power of 116W, it is ideal for applications in processor cooling systems, lasers, LED modules and thermoelectric coolers.

32-bit ARM Cortex-M0 MCU, 48KB Flash, 4KB SRAM, LQFP48, RoHS

Module with a light sensor and a proximity sensor up to 5 cm. It allows you to read the illuminance from 0.01 to 64000 lux and communicates via the I2C interface. Pimoroni PIM413

The internal WiFi antenna with a 3 dBi gain, supporting 2.4 GHz and 5.8 GHz frequency bands, provides stable wireless connections for devices such as Mini PCI cards, cameras, USB adapters, and network routers. Available with RP-SMA or SMA connectors, it ensures easy integration with a variety of network equipment. Its flexible rubber construction allows for optimal positioning to achieve the best signal.

Module with LM386 audio amplifier and loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020001